3Com gigabit switch issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pentium
    Badcaps Legend
    • Mar 2006
    • 2778
    • Canada

    #1

    3Com gigabit switch issues

    I picked up a 3Com 3C1671600 16-port gigabit switch to upgrade my place to full duplex gigabit and initially it worked fine.
    Then within a few hours it started randomly booting people not only off the wired network, but even the wireless network which was managed by a TrendNet access point.
    I cracked it open expecting bad caps like the linksys 8-port in my room but nope. It's full of nothing but Rubycon's and KGZ Nichicons and none show any signs of failure. I'm stumped as to what's up[ but can't fully write off blame on the switch yet. I didn't get the original 12V AC adapter so I don't know how many amps this thing needs as it's not printed on the underside (it just only states "MAX 3.5A". I plugged it into a bench supply and it only dres 1200ma so I am running it off a 2A power brick right now.
    Are what I'm seeing the signs of the swich not getting enough juice or something else?
    Find Nedry!


    Check the Vending machines!!

    <----Computer says I need more beer.
  • Scenic
    o.O
    • Sep 2007
    • 2642
    • Germany

    #2
    Re: 3Com gigabit switch issues

    KZG = replace on sight

    Comment

    • severach
      Badcaps Legend
      • Aug 2007
      • 1055
      • USA

      #3
      Re: 3Com gigabit switch issues

      Pictures, a ripple scan with a scope, or an in circuit ESR scan. The more you can supply the better.
      sig files are for morons

      Comment

      • Pyr0Beast
        Badcaps Veteran
        • Feb 2009
        • 406

        #4
        Re: 3Com gigabit switch issues

        External AC adapter might also be the culprit. They aren't exactly reliable.

        Comment

        • PCBONEZ
          Grumpy Old Fart
          • Aug 2005
          • 10661
          • USA

          #5
          Re: 3Com gigabit switch issues

          When did Nichicon launch a KGZ series?

          See if Power-'in' has a fuse on the board and use that as your guide.

          .
          Mann-Made Global Warming.
          - We should be more concerned about the Intellectual Climate.

          -
          Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.

          - Dr Seuss
          -
          You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
          -

          Comment

          • pentium
            Badcaps Legend
            • Mar 2006
            • 2778
            • Canada

            #6
            Re: 3Com gigabit switch issues

            I'm totally confused about your mentions o the KGZ's.
            So either they are a bad bad model or they don't really exist.
            Find Nedry!


            Check the Vending machines!!

            <----Computer says I need more beer.

            Comment

            • PCBONEZ
              Grumpy Old Fart
              • Aug 2005
              • 10661
              • USA

              #7
              Re: 3Com gigabit switch issues

              I've never seen a Nichicon KGZ,,, but apparently you have...
              Read -your own- post... the first one...

              ""It's full of nothing but Rubycon's and KGZ Nichicons""

              .
              Mann-Made Global Warming.
              - We should be more concerned about the Intellectual Climate.

              -
              Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.

              - Dr Seuss
              -
              You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
              -

              Comment

              • pentium
                Badcaps Legend
                • Mar 2006
                • 2778
                • Canada

                #8
                Re: 3Com gigabit switch issues

                Blammo.



                KZG

                Dumb me didn't read the series name right
                Last edited by pentium; 04-04-2011, 11:51 PM.
                Find Nedry!


                Check the Vending machines!!

                <----Computer says I need more beer.

                Comment

                • Uranium-235
                  Comrade Glimmer
                  • Aug 2007
                  • 5042
                  • US

                  #9
                  Re: 3Com gigabit switch issues

                  those labeled nichicon are...just nichicons but they look kinda fake, but I don't think they are from the research I just did 5 seconds ago

                  keep the nichicon, replace all the kgz's
                  Cap Datasheet Depot: http://www.paullinebarger.net/DS/
                  ^If you have datasheets not listed PM me

                  Comment

                  • PCBONEZ
                    Grumpy Old Fart
                    • Aug 2005
                    • 10661
                    • USA

                    #10
                    Re: 3Com gigabit switch issues

                    Originally posted by pentium
                    Blammo.



                    KZG

                    Dumb me didn't read the series name right
                    I don't see -any- Nichicon in that photo at all..
                    .
                    Mann-Made Global Warming.
                    - We should be more concerned about the Intellectual Climate.

                    -
                    Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.

                    - Dr Seuss
                    -
                    You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
                    -

                    Comment

                    • Scenic
                      o.O
                      • Sep 2007
                      • 2642
                      • Germany

                      #11
                      Re: 3Com gigabit switch issues

                      the 2 brown ones in the back, one pretty much dead center and the one closest to the front. All nichicon. (those with vertical markings)

                      i'd replace the chemicon KZG's and see if that fixes it. i bet it will..

                      Comment

                      • PCBONEZ
                        Grumpy Old Fart
                        • Aug 2005
                        • 10661
                        • USA

                        #12
                        Re: 3Com gigabit switch issues

                        OH,, so that's what a Nichicon KGZ looks like.
                        Mann-Made Global Warming.
                        - We should be more concerned about the Intellectual Climate.

                        -
                        Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.

                        - Dr Seuss
                        -
                        You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
                        -

                        Comment

                        Related Topics

                        Collapse

                        • Kingpin!
                          3COM OfficeConnect Gigabit Switch 16
                          by Kingpin!
                          3COM OfficeConnect Gigabit Switch 16 (3C1671600)

                          The switch has served me for 10+ years (was new when I bought it). It's a nice switch with connections on the back which makes for quite a clean desk. Reason for taking it apart was that the cooling fan was noisy so I expected it to be dirty/dusty inside and the need to order a new fan. What I found was that it was very dirty/dusty and some electrolytic capacitors which needs attention. There are 3 capacitors which needs to be replaced but the ESR on some of the other ones might be bad as well so I think I'll replace them all. Original...
                          09-17-2023, 04:58 AM
                        • Document Archive
                          Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) V 10 Specification for Upgrade or Repair
                          by Document Archive
                          This specification for the Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Switch V 10 SW5-017P boardview and Switch V 10 SW5-017P schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...
                          09-06-2024, 05:30 AM
                        • Natob82
                          Micro Momentary Push Switch?
                          by Natob82
                          Great to be here! I'm a newbie here trying to find a "micro", momentary push switch to repair a Sony "clamshell" video walkman. This micro switch has long since discontinued by Sony, however I hope there are third-party switches of the same size and functionality that I might be able to source to play the same role. The purpose of this switch is to tell the video walkman that the user has activated the mechanical tape eject button, turning that physical action into an electronic signal that tells the tape transport mechanism to open so one can load or eject a video tape. I...
                          12-21-2022, 05:22 AM
                        • grimacelord
                          NEC TurboExpress On/Off Power Switch Replacement Help
                          by grimacelord
                          Hello,

                          I've been working on a NEC TurboExpress and I accidentally got the plastic inside the power ON/OFF switch too hot while doing other repairs and melted it. At first, it would still power on when sliding the switch, but you had to really press inward while sliding to get it to work.

                          I removed the switch component and tried to gently melt the plastic back so it would work more reliably and all I managed to do was make it worse.

                          I need to find a replacement On/OFF switch for this, but having some trouble figuring out which kind of switch I need....
                          11-09-2023, 09:49 AM
                        • SluggerB
                          Help making a switch work the opposite way with a relay
                          by SluggerB
                          I have a very small float switch, I'm using in a very small tank. It only fits in one way. Link https://www.amazon.com/uxcell-Switch.../dp/B07DZ1J2GB

                          I want the switch to be open when the water is high, and closed when the water is low. Unfortunately it works the opposite. And since this switch is designed to be underwater, it's all sealed up, there is no taking it apart or hacking it up.

                          It will be driving a water pump, basic idea, when the water is low, switch closes, which turns on water pump, when enough water is in the tank, float switch floats,...
                          02-07-2025, 07:57 PM
                        • Loading...
                        • No more items.
                        Working...