Oscilloscope Help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • terry
    Senior Member
    • Oct 2007
    • 91
    • Milton Keynes, Bucks
    #1

    Oscilloscope Help

    Hi, I am after some help, my old Oscilloscope will only work on Windows 98 and I am upgrading my test pc to XP Pro. Should I save my money and get the PicoScope 2203 or buy the PicoScope 2204, PicoScope 2205. The Bandwidth on the 2203 is 5 MHz, The 2204 is 10 MHz and the 2205 is 25 MHz.

    I am only use this to fault finding LCD monitor and LCD tv.

    Here is a link to the Oscilloscope

    http://www.picotech.com/picoscope220...fications.html
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • EnderFFX
      P15 Gen 1, Error 2203 but B0 / C0 are okay. possibly GPU swap?
      by EnderFFX
      Hello!
      I bought a P15 Gen 1 as defective and without much hints to its history.
      Was sold as "cannot start, weird stuff on screen".

      So i bought a replacement GPU (2070 Super) and BOOM it worked immediatly, i got lucky.

      Only that error 2203 every single time with beep loud enough to wake the kids is annoying.

      I sincerly tried to read up and got a U One to work (3.5.40, that update tool will always say 3-5-40 is latest on cloud althiugh i ran it 3 times, it updated once from 3.5.30 to .40. Is that a problem? P15 Gen 1 is old anyways...)...
      07-26-2025, 04:23 AM
    • Tarot Superstars
      How not to Damage an Oscilloscope
      by Tarot Superstars
      Hello.
      I have jut got my first analogue oscilloscope. An Isotech 620 20MHz.

      I want to learn how not to damage it, and I found instructions on the internet obscure.
      They talk about ground, earth, floating ground, this, that....
      But they don't actually say anything anything useful so far.

      I want to know:
      Don't connect exactly this to exactly there or it blows up.

      For example, I am tracing a signal from a function generator in an audio amp, or testing for voltages in different parts of a circuit.
      I want to know what not to connect...
      08-29-2023, 02:27 PM
    • Evets
      Dynamco analogue oscilloscope
      by Evets
      I have recently acquired a Dynamco D7100 analogue oscilloscope without a user manual. As this is the first time I have owned or used an oscilloscope I would like to try and find an instruction book. The manufacturers no longer hold any information and a Google search only found one site but when I downloaded a 'service manual' all I got was gobbledegook. Any help would be gratefully appreciated or even pointers to a generic manual where I could learn more.
      08-30-2024, 06:54 AM
    • SolomonMan
      Vintage BK Precision 1403 Oscilloscope....
      by SolomonMan
      All,

      Some of you have helped me in the past and I am very appreciative of all the help! (I have fixed TVs/Stereos/ and other small appliances with your efforts...Thanks so much!!!



      Today I went to a local HAM Radio Festival. It was one of the smaller ones in our area. My stepfather is the HAM operator. I tinker in electronics but am a Software Programmer (27 years now).

      I was looking for a few odds and ends for some electronics work I have to do for the household/farm. Typically these type of shows have the grab bags or a electronics vendor...
      12-03-2023, 10:39 PM
    • rumpumpel1
      T490 error message 2203 Skip acknowledgement of an error message
      by rumpumpel1
      I have a T490 that displays the error message “2203: System configuration is invalid” immediately after the Lenovo logo every time it boots up.
      This message must be acknowledged with 'Esc'. On the one hand, I cannot eliminate the problem, on the other hand, I have not observed any other restrictions.
      Is it possible to change the BIOS so that this message no longer has to be acknowledged?



      MTM 20N3S19L00
      system SN PF1X4JP8
      board SN L1HF171000X...
      01-19-2025, 03:32 PM
    • Loading...
    • No more items.
    Working...