Looking for 470uF replacements

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • uligli
    Senior Member
    • Aug 2006
    • 139

    #1

    Looking for 470uF replacements

    Im looking 2 470uF 35v 10mm caps, did a research but no luck at all, with what others similar specs can i replace them?

    Can i use 470uF 25v? If so i can buy them from Topcat
    Last edited by uligli; 02-12-2010, 11:08 AM.
  • etnietering
    Badcaps Veteran
    • Apr 2009
    • 379
    • USA

    #2
    Re: Looking for 470uF replacements

    You might be able to replace them with 25v parts, but you'd have to measure the voltage across them and make sure it never spikes above 25v. A quick search at digikey yielded several matches for 470uF, 35v, 10mm diameter. What brand/series are they replacing?

    Comment

    • uligli
      Senior Member
      • Aug 2006
      • 139

      #3
      Re: Looking for 470uF replacements

      Originally posted by etnietering
      You might be able to replace them with 25v parts, but you'd have to measure the voltage across them and make sure it never spikes above 25v. A quick search at digikey yielded several matches for 470uF, 35v, 10mm diameter. What brand/series are they replacing?
      Capxon

      Thank you for the reply Digikey does have Nichicon VZ series

      Comment

      Related Topics

      Collapse

      • ssl6
        MSI K7T266 Pro (Ver. 1.0)
        by ssl6
        Hey Everyone,

        Long time lurker, but I think this is my first time posting.

        Just looking for some assistance on identifying some suitable replacement capacitors for an MSI K7T266 Pro (Ver. 1.0). I just got my hands on two of them actually, both working but one has some visibly bulging capacitors and the other has a few that I can't tell for sure if they're bulging because it's faint at best if they are.

        I'll be honest I don't fully understand much on capacitor spec sheets beyond voltage and capacitance but I can solder like nobodies business so I've...
        11-09-2023, 01:00 PM
      • slybunda
        Gemcon capacitor replacements?
        by slybunda
        taken from my thread about car alarm siren here: https://www.badcaps.net/forum/troubl...rm-siren-issue

        there are 2 caps which im looking to get replacements for.
        Branded as Gemcon
        single 100uf 16v 6.5mm x 11.5mm
        single 100uf 50v 8mm x 11.5mm
        lead spacing is around 3mm

        there is space for 16mm tall caps

        rs components is good place for me to go since its close by, what replacements do you suggest and do these need to be low esr?
        the caps have...
        02-05-2024, 03:36 PM
      • ratdude747
        Topcat's Acer Dual Slot 1 Server? - The Acer Altos 1100
        by ratdude747
        ...Before y'all ask, no, I'm not Topcat! ...

        Anyway, while unsuccessfully hunting down a rig (or parts for such) for my Dad's future gaming rig, I saw something I thought was Topcat's cup of tea... and it was. It also happened to be "local" to me (as a pickup only item), so I was dispatched to fetch this rig until the next time I head out to MO (which is a semi-regular occurance these days, between family and tradebait ).

        Anyway, I shot pics, and he said to post them, so here we go!

        This is a 1999 AcerAltos 1100 Server/workstation:
        ...
        03-09-2021, 07:40 PM
      • burom
        Xbox 360 Xenon Modern Capacitor Replacements
        by burom
        I found my old Xbox 360 in storage and opened it up to see if there was anything that broke since it was built in 2006 (launch era Xenon revision, never red ringed, never been serviced) and didn't want to find out by releasing magic smoke. Upon moving the dust bunnies out of the way I was greeted by a bunch of capacitors with crud coming out of the top; it doesn't seem to have leaked onto the board so at least I have that going for me.

        I'm posting here because I want to try to source replacement caps myself from Mouser or Digikey instead of braving eBay or waiting for places to have...
        06-07-2024, 05:10 PM
      • прямо
        Help me decide which MOSFETs are suitable replacements
        by прямо
        Friends,

        I need help. I'm having a bit of difficulty in deciding what would be the compatible replacement for these MagnaChip N-Channel Trench MOSFETs on a VRM circuit because they seem to have a much faster switching times compared to most N-Channel Trench MOSFETs out there that have the same (more or less) current rating and Rds(on)

        MDD1502 (high side), 48.5A 7.8mOhm
        MDD1501 (low side, 2 in parallel), 67A 5.6mOhm

        VGS is 10V High side drain is 12V. Low side drain is from PWM controller (Richtek RT8120A) phase output 1V.

        Here are the ones...
        02-01-2024, 09:06 PM
      • Loading...
      • No more items.
      Working...