SyncMaster 203b

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Logistics
    Badcaps Veteran
    • Apr 2007
    • 721
    • USA

    #1

    SyncMaster 203b

    I finally decide to fix up my Paps' system and the LCD decides it wants to go bad. What will happen is the image will start flickering really dark and sometimes go away completely so that all I"m left with is a white screen; sometimes half the screen is brighter than the other half, and sometimes it just goes black, but sometimes the image comes back nice and bright. Figures it would be right after I "had to go and touch it."

    Is it a caps thing or maybe the backlight is going bad?
    Presonus Audiobox USB, Schiit Magni 3, Sony MDR-V700
  • Wizard
    Badcaps Legend
    • Mar 2008
    • 2296

    #2
    Re: SyncMaster 203b

    Check your manufacture date on back of LCD if it is less than 3 years and paps have receipt for it, have it repaired.

    Cheers, Wizard

    Comment

    • Logistics
      Badcaps Veteran
      • Apr 2007
      • 721
      • USA

      #3
      Re: SyncMaster 203b

      I'm sure it was less than 3 years, but when we got it it was the last one, the floor model.
      Presonus Audiobox USB, Schiit Magni 3, Sony MDR-V700

      Comment

      • Wizard
        Badcaps Legend
        • Mar 2008
        • 2296

        #4
        Re: SyncMaster 203b

        Still applies, no matter, the receipt is your final say on 3 year warranty date.

        Get crackin' on the warranty proces.

        Cheers, Wizard

        Comment

        Related Topics

        Collapse

        • Raulnn
          TD Systems K50DLG12US half black and half white screen
          by Raulnn
          good night! I have this screen that looks half black and half white. the tcon gives a low vgh value (5-6v). the rest seem fine. I first removed the flex from one half of the panel and then the other. Removing the left, vgh increases it to 25-26v. I think the problem is in that area, but there are not many elements on the integrated controller board. there are no shorted capacitors. could they be a cof? Some help?

          By the way, now the entire screen is black. Maybe some flex was not connected correctly... I have exchanged the flex and there are no variations, I don't think they are the...
          01-20-2024, 04:49 PM
        • scubacamper
          Sharp Aquos LC-70C6400U Half Screen Dark
          by scubacamper
          I found another post on this site the other day which has been very helpful in troubleshooting this issue I am having with my tv. The left half of the screen is dark, and the other half is VERY slow to generate it's image - and it only generates part of its image at that.
          Based on this yt video, I have narrowed it down to an issue (short?) on the left side of the display, somewhere in the system of ribbon cables.
          when I remove the bezel and the rear cover, I can get the image to display correctly by manipulating the ribbon cables on the left side which connects the left lower display...
          05-03-2025, 12:19 PM
        • valvashon
          LG 55UH6150- trouble powering up, then half lit screen (pictures!)
          by valvashon
          The 55" LG has been in the basement for a few months without being used. Turned it on yesterday, set came on as it should and showed a complete screen for about 5 seconds (was on a broadcast channel but no antenna was connected), then the screen went mostly dark with about 1/3 of the screen on the right lighting up with brighter lines in that lit part (sorry, no pictures of that). Power LED was cycling too, preventing the TV from fully powering up.
          Pulled the back off, all boards looked OK. Pulled the LED connector, turned the set on to see if it would power up but I don't belive it...
          11-24-2024, 12:08 PM
        • soopacrucial
          Samsung Syncmaster 740BF repair
          by soopacrucial
          Hi folks,

          I'm new here and was wondering whether you might be kind enough to give me some advice on troubleshooting the following problem:

          Quite a few years ago now, a couple of years from new, my Samsung Syncmaster 740BF LCD monitor starting playing up by making a buzzing noise and then the display would go blank. I seem to remember the blue power led would also go off when this happened but that I'm not 100% sure of. By pressing the power button I do remember I could at first get it working again but eventually the problem would come back. At the time I had read about...
          10-29-2024, 02:40 PM
        • smic717394
          MSI Optix MPG27CQ half screen working. Identify burned component
          by smic717394
          Hi,

          I have a MSI Optix MPG27CQ screen to fix, only half screen is working, I found a burned chip on the right buffer board (S270DP01V00_HF_SR) but I can't read the model. Can anybody help?...
          04-08-2025, 05:53 AM
        • Loading...
        • No more items.
        Working...