So I've done a good amount of googling to find that what I need is either need new capacitors on the power supply or buy a new power supply board to make my 2 Soyo's work again. I would much prefer the capacitor route since it would be much cheaper than paying $50/PSU board.
Every one of the guides I've found for fixing a Soyo is either for the 22" or 24" models, which have noticeably different and smaller PSU's.
I disassembled one of them and can only see one capacitor that could be bad. It is the only one that has a slight bulge, and everything else looks okay to me. Note, I have no experience with this kind of tech work but I have access to a solder.
A link to the pictures:
https://www.dropbox.com/sh/r4tx2qjmh...tGiC4yW2a?dl=0
Every one of the guides I've found for fixing a Soyo is either for the 22" or 24" models, which have noticeably different and smaller PSU's.
I disassembled one of them and can only see one capacitor that could be bad. It is the only one that has a slight bulge, and everything else looks okay to me. Note, I have no experience with this kind of tech work but I have access to a solder.
A link to the pictures:
https://www.dropbox.com/sh/r4tx2qjmh...tGiC4yW2a?dl=0
But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. 
I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
