ASUS VH222 has no image

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #41
    Re: ASUS VH222 has no image

    I would try cooling the logic board first, then the T-CON board, if the problem is on the T-CON, then that will be real difficult to repair.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • ucdzombie
      Senior Member
      • Nov 2013
      • 54
      • USA

      #42
      Re: ASUS VH222 has no image

      Originally posted by budm
      I would try cooling the logic board first, then the T-CON board, if the problem is on the T-CON, then that will be real difficult to repair.
      OK I didn't try to cool it. However, I found something new. It has to do with movement. I tried tapping the side of the monitor and when I tap it, the lines are gone.

      When I was disassembling the monitor previously, at one point I opened the screen assembly. So maybe I ripped some cables there?

      Comment

      • Davi.p
        Hobbist
        • Sep 2009
        • 4261
        • Italy - Milan

        #43
        Re: ASUS VH222 has no image

        Primary negative and secondary ground can have a different voltage, so that potential could have damaged the mainboard or also the tcon bd but you will never get on top of this i think, it is much probably damaged one of the bigger chips, from the few i know... you can if you want try to find a new main bd or leave it so if it don't hurt too much..

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA

          #44
          Re: ASUS VH222 has no image

          "When I was disassembling the monitor previously, at one point I opened the screen assembly. So maybe I ripped some cables there?" OK, that is one important info, it sound like the bonding between the LCD glass panel and the long PCB has loose tab bonding. The connections can expand from the heat of the lamps, they do get pretty hot.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          • ucdzombie
            Senior Member
            • Nov 2013
            • 54
            • USA

            #45
            Re: ASUS VH222 has no image

            Originally posted by budm
            "When I was disassembling the monitor previously, at one point I opened the screen assembly. So maybe I ripped some cables there?" OK, that is one important info, it sound like the bonding between the LCD glass panel and the long PCB has loose tab bonding. The connections can expand from the heat of the lamps, they do get pretty hot.
            I remember some of the tabs came loose when I opened it. But I didn't know what to do nor did I think it was important. I'm such an idiot! So how should I fix the loose bonding? Double sided tape?

            Comment

            • budm
              Badcaps Legend
              • Feb 2010
              • 40746
              • USA

              #46
              Re: ASUS VH222 has no image

              Not easy, I never bother fixing bad tab bonding on monitor. I use thermal transfer pad, you can use rubber pad to press down on the tab. The bad part is that you have to take the panel apart again and just do not cause more or new damage.
              https://www.badcaps.net/forum/showthread.php?t=25371
              Never stop learning
              Basic LCD TV and Monitor troubleshooting guides.
              http://www.badcaps.net/forum/showthr...956#post305956

              Voltage Regulator (LDO) testing:
              http://www.badcaps.net/forum/showthr...999#post300999

              Inverter testing using old CFL:
              http://www.badcaps.net/forum/showthr...er+testing+cfl

              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
              http://s807.photobucket.com/user/budm/library/

              TV Factory reset codes listing:
              http://www.badcaps.net/forum/showthread.php?t=24809

              Comment

              • ucdzombie
                Senior Member
                • Nov 2013
                • 54
                • USA

                #47
                Re: ASUS VH222 has no image

                Originally posted by budm
                Not easy, I never bother fixing bad tab bonding on monitor. I use thermal transfer pad, you can use rubber pad to press down on the tab. The bad part is that you have to take the panel apart again and just do not cause more or new damage.
                https://www.badcaps.net/forum/showthread.php?t=25371
                This is the status of my screen right now:





                I think the top tabs are loose. The other night I was able to let it run without problem for an hour, because I remember repositioning the TCON board (which is connected to the taps). Do you see anything unusual? The third picture shows some glue on the side tap.

                Comment

                • ucdzombie
                  Senior Member
                  • Nov 2013
                  • 54
                  • USA

                  #48
                  Re: ASUS VH222 has no image

                  Originally posted by budm
                  Not easy, I never bother fixing bad tab bonding on monitor. I use thermal transfer pad, you can use rubber pad to press down on the tab. The bad part is that you have to take the panel apart again and just do not cause more or new damage.
                  https://www.badcaps.net/forum/showthread.php?t=25371
                  OK I think I fixed the problem using your solution. The monitor appears to be stable after many hours of normal usage. I placed rubber pads on top of the tabs and they're now stablized. Thank you all!!!!

                  Comment

                  Related Topics

                  Collapse

                  Working...