My brother brought me this LCD and asked me to fix it. Based on the info I can find its bad Caps most likely. I broke it down and one cap is definitely swollen ( labeled E) in pic and must be replaced. Checked the fuse with Ohm meter and tested good.
The Caps are listed as such:
a) Samxon 100uF 450V
b) LeLon 470uF 25v
c) SuScon 470uF 25v
d) TEapo 1000uF 25v
e) suScon 1000 uF 10v
f) SuScon 47uF 25v
G) Suscon 47uF 25v
H) SuScon 47uF 25v
I) Teapo 470uf 25v
j) Suscon 10uf 25v
k) Teapo 470uF 16v
L) Teapo 470uF 16v
M) SuScon 220uF 16V
Just need to know what to replace with (brand and possible improvement) and where to get them. Was not sure what you needed to see on board so included a small score of em.
Thnx in advance
Niko
P.S. Just found out he had a electrical issue which took out half of his house. When he got it fixed the LCD no longer worked. That's what you get for buying a cheapo Walmart surge protector for $9.99. LOL
The Caps are listed as such:
a) Samxon 100uF 450V
b) LeLon 470uF 25v
c) SuScon 470uF 25v
d) TEapo 1000uF 25v
e) suScon 1000 uF 10v
f) SuScon 47uF 25v
G) Suscon 47uF 25v
H) SuScon 47uF 25v
I) Teapo 470uf 25v
j) Suscon 10uf 25v
k) Teapo 470uF 16v
L) Teapo 470uF 16v
M) SuScon 220uF 16V
Just need to know what to replace with (brand and possible improvement) and where to get them. Was not sure what you needed to see on board so included a small score of em.
Thnx in advance
Niko
P.S. Just found out he had a electrical issue which took out half of his house. When he got it fixed the LCD no longer worked. That's what you get for buying a cheapo Walmart surge protector for $9.99. LOL
Comment