Re: Hanns G HW191D blinking power light no display



I must of lucked out shipping was only $5.23 for 25 caps. Not sure of weight. Maybe they had a special? Lets just hope UPS does not throw them from the truck all the way to the door...HEHEHEHE...

Re: Hanns G HW191D blinking power light no display




Thanx all. Placed order for all except the Samxon. Decided to try a cap job on an older Viewsonic VX1945 that quit working, while I was at it. Gotta love digi-key for prices and shipping options. Total project cost less than $20 for 2 monitors now if I can only see where I am soldering...LOL...

Re: Hanns G HW191D blinking power light no display

Thnx Lumberjack,

That helps a lot. Got just a few more question are there brands to avoid? Second Digikey does not seem to carry the capacitor I am looking for could you recommend another source?

After a little tweaking I think I found it. Does this look right? Also does the height really matter? I found a 1mm shorter one with 7000 hrs lifespan. Could I use that instead.

[url]http://www.digikey.com/scripts/dksearch/dksus.dll?pv725=4&FV=fff40002%2Cfff80009%2Cfffc000a%2Cfffc0235%2C340041%2Cb8367d%2Cfc0013%2C1140050%2C17700181&k=capacitor&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25[/url]...

My brother brought me this LCD and asked me to fix it. Based on the info I can find its bad Caps most likely. I broke it down and one cap is definitely swollen ( labeled E) in pic and must be replaced. Checked the fuse with Ohm meter and tested good.

The Caps are listed as such:

a) Samxon 100uF 450V
b) LeLon 470uF 25v
c) SuScon 470uF 25v
d) TEapo 1000uF 25v
e) suScon 1000 uF 10v
f) SuScon 47uF 25v
G) Suscon 47uF 25v
H) SuScon 47uF 25v
I) Teapo 470uf 25v
j) Suscon 10uf 25v
k) Teapo 470uF 16v
L) Teapo 470uF...