Hi,
The monitor worked fine a day ago, but when I turned it on today it showed no picture but the power LED did not blink, even on no signal.So I opened up the monitor and looked out for any blown cap on the power board.But found none.A flashlight test did not yield anything. I read somewhere that some 68 ohm resistors could be the cause.Please advise.
The monitor worked fine a day ago, but when I turned it on today it showed no picture but the power LED did not blink, even on no signal.So I opened up the monitor and looked out for any blown cap on the power board.But found none.A flashlight test did not yield anything. I read somewhere that some 68 ohm resistors could be the cause.Please advise.
Comment