Hp 1502

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • selldoor
    Slow Learner
    • Dec 2010
    • 7870

    #41
    Re: Hp 1502

    how long does it stay lit for? Laborious I know but you may have to check the two vga cables have the same pin configuration - back then there were many variations of vga
    and svga some with different wires and different wires on different pins. though I think they kept to a standard for the 6 (that is 2 x3 " colour" data wires.)
    Please upload pictures using attachment function when ask for help on the repair
    http://www.badcaps.net/forum/showthread.php?t=39740

    Comment

    • matthmal
      Badcaps Veteran
      • Nov 2012
      • 306
      • Malta

      #42
      Re: Hp 1502

      The only display that shows is that it is going to sleep mode but it doesnt even flicker with this cable. This cable has one less cable and 2 less pins in the vga connector

      Comment

      • selldoor
        Slow Learner
        • Dec 2010
        • 7870

        #43
        Re: Hp 1502

        I dont know what the going to sleep mode is- is it a message like "no signal."
        If you take the vga out does it give the no signal message.

        Check the source is still working? I have laptop which will not output to a second screen, but I think you said that is what you used and got a signal.
        When it is connected is it recognised by the pc - what does it show as in control panel
        system device manager monitor.
        Try changing back - perhaps changing cables has cleaned the pins?
        Please upload pictures using attachment function when ask for help on the repair
        http://www.badcaps.net/forum/showthread.php?t=39740

        Comment

        • matthmal
          Badcaps Veteran
          • Nov 2012
          • 306
          • Malta

          #44
          Re: Hp 1502

          if you take out the vga it gives you the same signal message.

          It is being detected on the laptop itself as a secondary monitor and I can change the refresh rate and so on from the laptop if i want (and i did to test).

          well i will try to change back the cable tomorrow morning.

          Comment

          • matthmal
            Badcaps Veteran
            • Nov 2012
            • 306
            • Malta

            #45
            Re: Hp 1502

            Originally posted by matthmal
            if you take out the vga it gives you the same signal message.

            It is being detected on the laptop itself as a secondary monitor and I can change the refresh rate and so on from the laptop if i want (and i did to test).

            well i will try to change back the cable tomorrow morning.
            may i point out my mistake..... when you take out the vga it gives you check video cable message

            Comment

            • selldoor
              Slow Learner
              • Dec 2010
              • 7870

              #46
              Re: Hp 1502

              Did you change the cable back - with either cable is it on long enough to get into the osd
              menu to do a reset?
              Please upload pictures using attachment function when ask for help on the repair
              http://www.badcaps.net/forum/showthread.php?t=39740

              Comment

              • matthmal
                Badcaps Veteran
                • Nov 2012
                • 306
                • Malta

                #47
                Re: Hp 1502

                already changed the cable to the original one problem persisted. The original cable didnt even give me the chance of entering in the menu as the menu only appears for a second and goes away with the flicker, I'll try with the other cable again and keep you posted.

                Comment

                Related Topics

                Collapse

                • didouche1200
                  Toshiba portage Z30-B31002M_MDK-MB-17 W 1502-3 bios
                  by didouche1200
                  ineed Toshiba portage Z30-B31002M_MDK-MB-17 W 1502-3 _16 MB bios dump...
                  12-22-2022, 02:20 AM
                • karoliens
                  MacBook Pro 1502 820-4924 Keyboard and Trackpad do not work
                  by karoliens
                  Hi,

                  I have 820-4924 board that has keyboard and trackpad problem. I suspect it is logic board issue.

                  I was told that in attempt to repair MagSafe charger wires were mixed up and therefore it does not power on.

                  Using PSU machine starts and is stuck at the folder with question mark. If I put USB drive with macOS it start in the installation wizard, but keyboard and trackpad do not work.

                  I checked voltages at the keyboard and trackpad connector:

                  PP3V3_S4_TPAD 3.3V
                  PP3V42_G3H_TPAD 3.42V
                  WS_KBD_ONOFF_L 3.42V...
                  10-07-2021, 02:56 AM
                • japlytic
                  HP 1502 (P9617D) pulsing on and off with bad capacitors
                  by japlytic
                  Today, my daughter's HP 1502 (P9617D) monitor (3 years old) was pulsing on and off (with a flash of video). I tried it on another computer with the refresh rate set within the monitor's specifications - same result.

                  Later, I opened up the monitor and found that all but two (one of them was an LZ series unit) of the low-ESR Hermei capacitors have bulged .

                  The list of the capacitors used as below (I cannot find datasheets for the Hermei units) :

                  C922, C925: Hermei LE 1000uF 16V, low impedance, general purpose, replacing with 1000uF 16V...
                  10-07-2006, 08:55 PM
                • Document Archive
                  NVIDIA GeForce GTX TITAN PG600 Schematic & Board View
                  by Document Archive
                  NVIDIA GeForce GTX TITAN PG600 Schematic & Board View

                  The GeForce GTX TITAN was an enthusiast-class graphics card by NVIDIA, launched on February 19th, 2013. Built on the 28 nm process, and based on the GK110 graphics processor, in its GK110-400-A1 variant, the card supports DirectX 12. Even though it supports DirectX 12, the feature level is only 11_0, which can be problematic with newer DirectX 12 titles. The GK110 graphics processor is a large chip with a die area of 561 mm² and 7,080 million transistors. It features 2688 shading units, 224 texture mapping units, and 48 ROPs....
                  10-02-2024, 09:01 AM
                • Document Archive
                  NVIDIA GeForce GT 1030 Schematic & Board View
                  by Document Archive
                  NVIDIA GeForce GT 1030 Schematic & Board View

                  The GeForce GT 1030 was an entry-level graphics card by NVIDIA, launched on May 17th, 2017. Built on the 14 nm process, and based on the GP108 graphics processor, in its GP108-300-A1 variant, the card supports DirectX 12. This ensures that all modern games will run on GeForce GT 1030. The GP108 graphics processor is a relatively small chip with a die area of only 74 mm² and 1,800 million transistors. It features 384 shading units, 24 texture mapping units, and 16 ROPs. NVIDIA has paired 2,048 MB GDDR5 memory with the GeForce GT 1030,...
                  10-01-2024, 02:42 PM
                • Loading...
                • No more items.
                Working...