I recently revived a dead VP2030b by replacing the capxon capacitors(3x 180uF 35V, 6x 100uF 25V, 2x 1000uf 6.3V). All of them had the familiar bulge.
Once it's on, the monitor works fine but it takes a very long time to switch on. When the power button is pressed, the green power led lights briefly, then goes out. It then takes several minutes before the monitor turns on.
There aren't any other capxon capacitors and I couldn't see anything else that looked out of the ordinary. Is the delay normal for this monitor? If not what else needs replacing?
Thanks,
Rob.
Once it's on, the monitor works fine but it takes a very long time to switch on. When the power button is pressed, the green power led lights briefly, then goes out. It then takes several minutes before the monitor turns on.
There aren't any other capxon capacitors and I couldn't see anything else that looked out of the ordinary. Is the delay normal for this monitor? If not what else needs replacing?
Thanks,
Rob.
Comment