I'm Looking For A Part

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lcdman
    TinkerTech
    • Nov 2010
    • 232
    • U.S.A.

    #1

    I'm Looking For A Part

    Hello All,

    I have a part I need to replace on a LG 22" logic/video board. A friend is looking for it and I couldn't absolutely identify it. Contacted Digi-Key, they gave me two possible candidates.

    http://search.digikey.com/scripts/Dk...ords=CTX088-ND

    http://search.digikey.com/scripts/Dk...ords=CTX877-ND

    Perhaps someone could help me narrow down to one? I'll provide a model number if that helps at all?

    Thanks As Always
    Lcdman
    Attached Files
  • joshnz
    Badcaps Veteran
    • Feb 2011
    • 969
    • New Zealand

    #2
    Re: I'm Looking For A Part

    That is a 14.31818 MHZ CRYSTAL
    The two digi-key ones have the same load capacitance as the one you have.
    as for which one is suited not sure maybe someone here can help.
    My pc
    CPU : AMD PHENOM II x4 @ 3.5Ghz
    MB : ASUS M4A89TD PRO USB3
    RAM : Kingston ValueRAM 16gb DDR3
    PSU : Cooler Master 850W Silent Pro
    GPU : ATI Radeon HD 6850

    Comment

    • Toasty
      Badcaps Legend
      • Jul 2007
      • 4171

      #3
      Re: I'm Looking For A Part

      Without seeing and examining or a drawing or schematic of the circuit, you'll have to get one of each and see which one works.

      CTX877-ND - Is for parallel resonant circuits, which require a load capacitance (18pF) in the circuit for the crystal.

      CTX088-ND - Is for series circuits which do not need the load capacitance.

      .
      veritas odium parit

      Comment

      • lcdman
        TinkerTech
        • Nov 2010
        • 232
        • U.S.A.

        #4
        Re: I'm Looking For A Part

        Hello Again,

        Thanks to all so far. The logic/video board is out of a LG W2252TQ. I haven't yet found a schematic for the logic/video pcb. I could try buying both crystals from Digi-Key but would love to just buy one and not both. Does anyone out there have the schematic for just the logic/video board?

        Have A Great Day
        Lcdman

        Comment

        • jetadm123
          Badcaps Legend
          • Feb 2010
          • 2169

          #5
          Re: I'm Looking For A Part

          Well, both crystals are under $1.00 each and shipping will probably be around $3.00. I can't see much of an excuse not to buy both.

          Comment

          • Toasty
            Badcaps Legend
            • Jul 2007
            • 4171

            #6
            Re: I'm Looking For A Part

            Originally posted by jetadm123
            Well, both crystals are under $1.00 each and shipping will probably be around $3.00. I can't see much of an excuse not to buy both.

            QFT!

            (My point to begin with)
            veritas odium parit

            Comment

            • PlainBill
              Badcaps Legend
              • Feb 2009
              • 7034
              • USA

              #7
              Re: I'm Looking For A Part

              Originally posted by lcdman
              Hello Again,

              Thanks to all so far. The logic/video board is out of a LG W2252TQ. I haven't yet found a schematic for the logic/video pcb. I could try buying both crystals from Digi-Key but would love to just buy one and not both. Does anyone out there have the schematic for just the logic/video board?

              Have A Great Day
              Lcdman
              Post a picture of the board showing the area around the crystal clearly. It should be possible to identify any load capacitors (if present).

              PlainBill
              For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

              Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

              Comment

              • Krankshaft
                Badcaps Legend
                • Jan 2007
                • 2328
                • USA

                #8
                Re: I'm Looking For A Part

                Don't forget some crystals have the load capacitors in the case making identification more difficult.

                The Bob Parker ESR meter is a prime example there is a place for two load capacitors on the board that are unpopulated because the crystal has internal caps.
                Last edited by Krankshaft; 07-28-2011, 10:52 AM.
                Elements of the past and the future combining to make something not quite as good as either.

                Comment

                • PlainBill
                  Badcaps Legend
                  • Feb 2009
                  • 7034
                  • USA

                  #9
                  Re: I'm Looking For A Part

                  Originally posted by Krankshaft
                  Don't forget some crystals have the load capacitors in the case making identification more difficult.

                  The Bob Parker ESR meter is a prime example there is a place for two load capacitors on the board that are unpopulated because the crystal has internal caps.
                  In that case, he buys the wrong crystal, and has to reorder.

                  PlainBill
                  For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

                  Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

                  Comment

                  Related Topics

                  Collapse

                  • edugimeno
                    Finding the wrong part at a loooong led strip, part works fine, part flickers, all parallel...
                    by edugimeno
                    Hi There!
                    I'm trying to help my friend who owns a restaurant be just bought.
                    He has a very long LED strip running along all the walls and columns. The strip is attached facing down 2in above the floor, using a wall panel that ends in a metal rail that finishes the panel underneath
                    It's stuck using, I guess, the 2 sided tape that comes with the strip
                    The issue is that like 1/2 of the full length, including 1/2 one wall, another entire wall, and one column, flickers after 4 or 5 minutes ON. Particularly it flashes staying OFF most of the time and flashing ON for 1 tenth...
                    09-05-2024, 09:34 AM
                  • G-Sting
                    iPad Pro A1876 SHORT Part Identify Help Needed
                    by G-Sting
                    So My iPad was not charging and booting up . i went to a local technician and he checked with thermal and this Part marked in 1st Photo is Short.
                    So then i went on to boardview and downloaded the schematics and identified this part in 2nd Photo. Now i am confused what exactly is the part called ? where should i get this from ?


                    i contacted my technician and he sent me his BoardVIew screenshot in 3rd Photo. In his Boardview the part is called X2826.... Something

                    SO My main concern is what part should i order what should i search the name for ?
                    on Ipad...
                    05-15-2025, 09:30 AM
                  • Yanleb
                    Panasonic part number in service manuals
                    by Yanleb
                    In the Panasonic service manuals, both in the board schematics and in the part listing, the part numbers that are given are Panasonic part numbers instead of the actual part numbers.

                    This is especially annoying for small SMD components like diodes and transistors when you only have 1-3 digits printed on the component body.

                    For an example, look at the attached PDF.

                    Do you have a way to cross reference the Panasonic part number with the actual part number?

                    Thanks....
                    07-03-2023, 08:16 PM
                  • FreakyMex
                    Trouble to identify part (Lunii screen) for replacement
                    by FreakyMex
                    Hello guys. I'm a complete noob in electronics. I'd like to repair my child Lunii's (a "story box"), basically an audio player that allows the childs to choose between several options the places, characters, objects of the story, and then play a story according to the choice of the child. There is a screen that display the selected option before each choice. The Lunii fell and the screen is now broken.
                    I'd like to repair it (probably just have to change the part, because the lunii still works perfectly fine) but I can't manage to identify the part/order it online. Do you have any...
                    02-17-2025, 01:16 AM
                  • esinior
                    Smd code to part number
                    by esinior
                    Hi i have a smd part with probably mark "QO 11" or "Q0(zero) 11" on it, and its package is SOT89, i doubt its KTB1260 PNP transistor, but in measuring with diode mode of multimeter it shows number 1.4 between emitter and collector pins and its not open circuit, and .59 from collector to base and .8 from emitter to base , and these numbers doesn't match a pnp transistor, i couldn't find any part number and datasheet for it, does anybody have information for that part number?
                    I've attached pics of this part
                    Thanks...
                    08-20-2024, 02:50 AM
                  • Loading...
                  • No more items.
                  Working...