Announcement

Collapse
No announcement yet.

HP L1710 starts fine then solid white after a few seconds

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    HP L1710 starts fine then solid white after a few seconds

    I am having some trouble figuring what is going on with this. If someone has any ideas I would be grateful. I measure a consistent 5.2V at video board. When I first turn it on it works for maybe 15 seconds then solid white. If I turn it off and back on it works a little while shorter each time. No bulging caps on either board. I went a head and replaced one 470u 16V Elite on the PSU 5V rail with a 470u 25V Nichicon.
    Thanks in advance.
    Attached Files
    Tags: None
    #2
    Re: HP L1710 starts fine then solid white after a few seconds

    Check voltage regulators U701 and U702. List the part number for each and measure the DC voltage on each pin with respect to ground.

    Measure the voltage when the signal is good and then when it is white.
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---

    Comment

      #3
      Re: HP L1710 starts fine then solid white after a few seconds

      Thanks for the fast reply. U701 is a 17-33L it has 5.2V in and 3.3V out . U702 is a 17-18L with a 5.2V in and 1.8V out. These voltages are the same when screen is working and when white.

      Comment

        #4
        Re: HP L1710 starts fine then solid white after a few seconds

        Originally posted by Diablo_Rojo View Post
        U701 is a 17-33L it has 5.2V in and 3.3V out . U702 is a 17-18L with a 5.2V in and 1.8V out.
        Those readings look good. The only other suggestion I have at the moment is to replace the remaining caps on the logic board and retest.
        --- begin sig file ---

        If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

        We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

        Please do not post inline and offsite as they slow down the loading of pages.

        --- end sig file ---

        Comment

          #5
          Re: HP L1710 starts fine then solid white after a few seconds

          The cable from the logic board to the panel might be bad/loose as well?
          --- begin sig file ---

          If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

          We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

          Please do not post inline and offsite as they slow down the loading of pages.

          --- end sig file ---

          Comment

            #6
            Re: HP L1710 starts fine then solid white after a few seconds

            Thanks for the ideas. I have reseated the cable from the logic board to the panel several times with no improvement. I will replace the caps on the logic board and report back.

            Comment

              #7
              Re: HP L1710 starts fine then solid white after a few seconds

              The fault is regularly associated with a problem on the 'tag board', thats the one at the top,attached to the screen.Suggest you check fuse/s on that.

              Comment

              Previous template Next
              Working...
              X