HP lcd L1502 15"

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Scenic
    o.O
    • Sep 2007
    • 2640
    • Germany

    #41
    Re: HP lcd L1502 15"

    Samsung's and LG's mostly die from bad caps. those are usually the easiest to fix.
    Especially the 22" Samsungs (T220, 2233BW, 225BW, 226BW etc. ..)

    those are a good start. they're pretty common and there are quite a few threads on here

    PS: *jealous about your tablet pc* >.>

    Comment

    • leov
      Member
      • Mar 2011
      • 45

      #42
      Re: HP lcd L1502 15"

      Originally posted by PlainBill
      Craigslist, Freecycle, Kijiji, recyclers.

      PlainBill
      I will have to check out the recyclers around my town. There is not much on craigslist in my area.

      I am not familiar with kijiji or freecycle. Are those just websites?

      Comment

      • leov
        Member
        • Mar 2011
        • 45

        #43
        Re: HP lcd L1502 15"

        Originally posted by Scenic
        Samsung's and LG's mostly die from bad caps. those are usually the easiest to fix.
        Especially the 22" Samsungs (T220, 2233BW, 225BW, 226BW etc. ..)

        those are a good start. they're pretty common and there are quite a few threads on here

        PS: *jealous about your tablet pc* >.>

        :/ school made us buy tablets. Its what they call "paperless campus". They make you buy the pc then they charge a student arm and a leg for the maintenance and repairs.

        Comment

        • PlainBill
          Badcaps Legend
          • Feb 2009
          • 7034
          • USA

          #44
          Re: HP lcd L1502 15"

          Originally posted by leov
          I will have to check out the recyclers around my town. There is not much on craigslist in my area.

          I am not familiar with kijiji or freecycle. Are those just websites?
          Google is your friend. Kijiji is eBay's answer to Craigslist. Freecycle is a community oriented setup, usually based on Yahoo! Groups that only allows free transactions. But about half the postings are for requests.

          PlainBill
          For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

          Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

          Comment

          • Th3_uN1Qu3
            Believe in
            • Jul 2010
            • 6031
            • Romania

            #45
            Re: HP lcd L1502 15"

            Originally posted by PlainBill
            Freecycle is a community oriented setup, usually based on Yahoo! Groups that only allows free transactions. But about half the postings are for requests.
            Yeah, and the other half is for furniture... Local auction sites are the best bet usually.
            Originally posted by PeteS in CA
            Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
            A working TV? How boring!

            Comment

            • leov
              Member
              • Mar 2011
              • 45

              #46
              Re: HP lcd L1502 15"

              Thanks guys!

              Comment

              Related Topics

              Collapse

              • B0r1s
                Samsung UE49KS7000SXXH - fast clicking sound in standby mode
                by B0r1s
                PSU - BN44-00878A

                Symptoms:

                The TV turned itself off, and I haven't been able to turn it back on. The standby voltage was unstable and lower than it should be.
                A weak clicking sound was coming from the transformer.

                Video with clicking sound:https://www.youtube.com/watch?v=lAduhjNtqCA

                Progress:

                After the transformer, I measured four Schottky diodes. DM862C and DM864C diodes readings were 003 in both directions. After detaching them from the circuit and measuring them, DM864C was the shorted one. These Schottky diodes are SB550.I...
                01-17-2023, 04:58 PM
              • slimmy182
                [SOLVED] M1 MacBook Pro clicking sound logic board 5V no power on A2338 820-02020
                by slimmy182
                Hello, I bought this Mac from a friend, he said that it simply stop working. The MacBook looks very clean but does not power on, stuck on 5v 0.42A, and sometimes display 5V and 0A (then 0.071A and again 0A).

                I opened it looking for some problem, it was not touched before for sure and the board is very clena, no spot of corrosion at all from what I can see. Voltage on multimeter of the board off the case it's the same, 5V 0.42A. But then I noticed this "clicking sound" come from the board ( I attached here the audio file).

                Looking on google I found this:...
                01-14-2023, 11:55 AM
              • beetle1303
                Carver CM-1090 - Power relay clicking on & off, then fuse blown after 20-30 seconds of power cycling.
                by beetle1303
                I gotten a Carver CM-1090 amplifier from a friend who has kept it in storage for decades. Opened it up, thick layer of dust cumulated everywhere. Vacuumed it semi-cleaned, and blown off as much as possible the remaining dust. This is a 220V version.

                On initial powered up with nothing connected - it works with all the lights and button indicator lit up as pressed, etc. I then powered off, connected a CD player into the CD RCA input and powered it on. It seemed to work for a short while and when I turned the volume up and down to see the the VUs works, the power started to clicked off...
                01-13-2025, 08:49 PM
              • mikelu53
                Samsung UN60D8000YF Clicking BN44-0432A
                by mikelu53
                I have a UN60D8000YF with a BN44-0432A power supply and a BN41-01622C main board.
                The set was working then not,then started clicking.
                Wilth the power supply disconnected from the main board I can occasionally get it to power the LED back lights , getting it to stop clicking is luck.
                Checked caps and diodes and mosfets the best I could. When it stop clicking there is 5v and 18v on the connector to the main board.
                A schematic or suggestion would be great.
                Thanks
                01-21-2023, 03:14 PM
              • bffargo
                2014 LG 60" Plasma shut down just clicking unless I disconnect 17V line to main CPU
                by bffargo
                LG 60PB66550 NOV 2014
                PSU: EAY63168603
                PCB: EAX65359531 2013.11.01 Rev:1.0

                Main board: EAX65399305(1.0) 13.11.27 PU42A/PA42A/PD42A

                Symptom:
                While watching, just went black and started clicking relay every few seconds.

                Initial diagnosis:
                Removing JUST the main CPU/Input PCB from circuit stops the clicking. No problems with any other boards/drivers. (Removing all other boards and only putting Main back in is all it takes to start clicking again)

                Deeper diagnosis:
                Pulling pins #1/#2 (Blue/Grey) from the connector housing...
                09-09-2022, 07:34 PM
              • Loading...
              • No more items.
              Working...