Re: Hanns-G HG281D, LCD Monitor no power
OK, the capacitors are installed with correct polarity? if they are, then use ohm meter and check the resistance between the two legs of each one of those two caps you replaced to see if it shows shorted circuit due to solder bridge. Recheck and verify that all the cables are connected back in place correctly.
OK, the capacitors are installed with correct polarity? if they are, then use ohm meter and check the resistance between the two legs of each one of those two caps you replaced to see if it shows shorted circuit due to solder bridge. Recheck and verify that all the cables are connected back in place correctly.
Comment