Akai AA-V305

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Fripacks
    Senior Member
    • Jun 2021
    • 59
    • Canada
    #1

    Akai AA-V305

    Hi,
    I have this amplifier to repair, it's completly dead, the first relay click when I push on with the Power switch on rear of the amplifier but if I push on Power switch in front nothing, I check the Power supply and I found it not have standby voltage, someone have the service manual?
    Tags: None
    • Fripacks
      Senior Member
      • Jun 2021
      • 59
      • Canada
      #2
      Re: Akai AA-V305

      Someone have some information on it?

        Comment

        • Offscreen6
          Member
          • Jan 2021
          • 22
          • United States
          #3
          Re: Akai AA-V305

          Unfortunately it looks like the only service manuals online for this particular machine are going to cost you. I found two sites online that are selling it right now, marked below.

          https://www.vintageaudioonline.com/p...anual-original

          https://www.servicemanuals.net/servi...1/results.aspx

            Comment

            • CapLeaker
              Leaking Member
              • Dec 2014
              • 7975
              • Canada
              #4
              Re: Akai AA-V305

              post some high resolution pictures of the front and back of your power supply.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Natob82
                  Micro Momentary Push Switch?
                  by Natob82
                  Great to be here! I'm a newbie here trying to find a "micro", momentary push switch to repair a Sony "clamshell" video walkman. This micro switch has long since discontinued by Sony, however I hope there are third-party switches of the same size and functionality that I might be able to source to play the same role. The purpose of this switch is to tell the video walkman that the user has activated the mechanical tape eject button, turning that physical action into an electronic signal that tells the tape transport mechanism to open so one can load or eject a video tape. I...
                  12-21-2022, 05:22 AM
                • Document Archive
                  Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) V 10 Specification for Upgrade or Repair
                  by Document Archive
                  This specification for the Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Switch V 10 SW5-017P boardview and Switch V 10 SW5-017P schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...
                  09-06-2024, 05:30 AM
                • grimacelord
                  NEC TurboExpress On/Off Power Switch Replacement Help
                  by grimacelord
                  Hello,

                  I've been working on a NEC TurboExpress and I accidentally got the plastic inside the power ON/OFF switch too hot while doing other repairs and melted it. At first, it would still power on when sliding the switch, but you had to really press inward while sliding to get it to work.

                  I removed the switch component and tried to gently melt the plastic back so it would work more reliably and all I managed to do was make it worse.

                  I need to find a replacement On/OFF switch for this, but having some trouble figuring out which kind of switch I need....
                  11-09-2023, 09:49 AM
                • SluggerB
                  Help making a switch work the opposite way with a relay
                  by SluggerB
                  I have a very small float switch, I'm using in a very small tank. It only fits in one way. Link https://www.amazon.com/uxcell-Switch.../dp/B07DZ1J2GB

                  I want the switch to be open when the water is high, and closed when the water is low. Unfortunately it works the opposite. And since this switch is designed to be underwater, it's all sealed up, there is no taking it apart or hacking it up.

                  It will be driving a water pump, basic idea, when the water is low, switch closes, which turns on water pump, when enough water is in the tank, float switch floats,...
                  02-07-2025, 07:57 PM
                • LearningToRepair
                  How to read PCB symbol for 6 pin push-pull switch?
                  by LearningToRepair
                  Hi!

                  I am a bit confused how to read PCB markings for 6 pin push pull switch. I had problem with my 6 pin push-pull switch on my UT58A multimeter. It did not lock properly. So I decided to replace it. I forgot the orientation of original button. And now I need some help with understanding PCB.

                  I learned from google how to identify orientation of push-pull button:


                  But I am a bit confused which way PCB expects it. I expected that PCB would have some kind on intent marked on it. But mine has 3 marked instead. I attached the photo of it where I marked...
                  02-24-2021, 04:18 PM
                • Loading...
                • No more items.
                Working...