Sony str-dn850 home receiver no left channel.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • erickeri1234
    Senior Member
    • May 2013
    • 98
    • usa
    #1

    Sony str-dn850 home receiver no left channel.

    Ok start off by saying I have some tv repair but not much on the receiver end.
    Picked up a Sony str-dn850 home receiver when I first plugged it in powered it up it came on and the system check relay clicked and about 3 seconds later it went into protection mode.
    I powered it off and on. Comes on no problem.
    Hooked up speakers and it started to pop and crackle but the volume was all the way down.. and I was only getting that sound out of the left channel. Right channel had no sound.. but every time I turn the volume up it has a smell crackling sound on ever volume number... and no other channels or sound was working but front speaker

    Just tried it again and I only get sound from the right speakers but it still crackling and very very low music.(barely hear it)
    Tags: None
    • mark97564
      New Member
      • Aug 2023
      • 3
      • USA
      #2
      Re: Sony str-dn850 home receiver no left channel.

      Sony is known for crap solder joints in the amplifier section, reflow all the joints on the transisters and on all the bigger components and see if that fixes your problem.. I love Sony home theater receivers and car stereos, I think they sound better than most, but every Sony receiver I've owned I've had to reflow solder joints. They become cracked and the symptoms are pretty much what your describing

        Comment

        • petehall347
          Badcaps Legend
          • Jan 2015
          • 4427
          • United Kingdom
          #3
          Re: Sony str-dn850 home receiver no left channel.

          2 years ago but a classic protect relay problem of dirty contacts . more power more sparks more current gets through .

            Comment

            Previous template Next

            Related Topics

            Collapse
            • JRade
              Audio video receiver KENWood KR-V990D,no sound
              by JRade
              When I select the FM receiver, I find a radio station, the sound is heard on REC OUT(L,R), REC TAPE1(L,R),REC TAPE2(L,R) on high-ohm headphones, the sound regulation does not work.
              The output reacts when I connect the record player to PRE OUT FRONT L, the sound is heard in the speaker but the sound regulation does not work. Then it does not matter what I chose on the front selector.
              I replaced the capacitor C303/0.047F, nothing changes.
              I'm asking for help, what should I do next?
              Thanks in advance!...
              08-05-2025, 10:23 PM
            • CDNBrewer
              Running out of Ideas, hoping someone smart can provide some for my ONKYO TX-SR353 Receiver
              by CDNBrewer
              Hello Everyone,

              I have an Onkyo TX-SR353 Audio/Video Receiver (5.1 ch with HDMI) that I am having a really hard time diagnosing and I'm about to throw this in the junk and go buy a new unit that is on sale until the 7th.

              Symptoms:
              • Intermittent (part of the reason why i'm having a hard time isolating problem), sometimes will work for 10+h at a time without issue
              • Original symptom was wife reported loud banging noise (like someone was banging on the wall with their fists) from the LEFT SURROUND speaker and then the unit shut off.
              • I swapped the Left and Right surround
              ...
              08-05-2025, 09:29 PM
            • karatzdi
              Denon AVR 1908, High pitch noise on Surround back Left channel after long overhaul
              by karatzdi
              Hello,

              I know some might say... just buy another one. Sell it as parts..!

              So had this AMP for quite some time. Recently I saw light smoke coming out of the AMP. Had my fire extinguisher close by. Just kidding. Turned immediately all devices off from mains.
              Let things cool a bit, and opened up the amp device. I clearly saw on the main board which hosts the 5X amp (5.1), 3 10 ohms 1W resistors had their leads looking black, while the rest of the remaining 2 x 10 ohms were brownish as being installed from factory.

              Spent some time downloading the Service...
              06-11-2024, 08:38 AM
            • momaka
              RCA WHP141 wireless headphones wired up
              by momaka
              OK, this one dates back to 2015! I thought I had posted this, but realized I didn’t when I posted a picture of something else. So here it goes…

              Back in 2015, I bought a pair of RCA WHP141 wireless headphones at Micro Center for $2. I even mentioned it in the best cheap/free scores thread right here. Just forgot to follow up with that.

              As mentioned back then, these are (were) 900 MHz FM wireless headphones. No modern day Blutooth or anything like that. I knew they wouldn’t be great headphones or even that good… but the price was right! So let’s take...
              02-22-2023, 06:28 PM
            • HelpMeRepair
              Yamaha RX-A3010 left channel no signal
              by HelpMeRepair
              Hi everyone , I have a rx-A3010 that all alllll the channel working except of Front left , if someone can lead me on what to begin wit it would be very helpful

              what I did so far ,

              factory reset
              test all other channel
              tone test
              dissasemble and look , visual inspection witout full dissasembly
              looked at all the mosfet for temperature to see if they eas operating
              scratch my head couple of time

              thanks in advance all help is appreciated , service manual are welcome too ! =)...
              11-14-2024, 02:48 PM
            • Loading...
            • No more items.
            Working...