Help diagnosing JBL Live 400BT headphones that do not power on

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • mattmichielsen
    New Member
    • Mar 2022
    • 2
    • United States
    #21
    Re: Help diagnosing JBL Live 400BT headphones that do not power on

    Aside from the two triangle bit screws on the top, are there other screws to separate the outside part of each earpiece? I can't seem to find a way to separate the two halves, and it looks like there are a couple more screw posts in your pictures. Thanks!

      Comment

      • lotas
        Badcaps Legend
        • Jan 2016
        • 4620
        • Russia
        #22
        Re: Help diagnosing JBL Live 400BT headphones that do not power on

        https://www.youtube.com/watch?v=vb88KQnYky8

          Comment

          • mattmichielsen
            New Member
            • Mar 2022
            • 2
            • United States
            #23
            Re: Help diagnosing JBL Live 400BT headphones that do not power on

            Thanks!

            Originally posted by lotas
            https://www.youtube.com/watch?v=vb88KQnYky8

              Comment

              Previous 1 2 template Next

              Related Topics

              Collapse
              • momaka
                RCA WHP141 wireless headphones wired up
                by momaka
                OK, this one dates back to 2015! I thought I had posted this, but realized I didn’t when I posted a picture of something else. So here it goes…

                Back in 2015, I bought a pair of RCA WHP141 wireless headphones at Micro Center for $2. I even mentioned it in the best cheap/free scores thread right here. Just forgot to follow up with that.

                As mentioned back then, these are (were) 900 MHz FM wireless headphones. No modern day Blutooth or anything like that. I knew they wouldn’t be great headphones or even that good… but the price was right! So let’s take...
                02-22-2023, 06:28 PM
              • Superbee_dad
                Sharp 80” long short flash backlight error - Help
                by Superbee_dad
                Hello Sharp TV experts
                Our Sharp LC-80LE642U displays one short one long flash error code which is a backlight error. I went into service mode and there were 8 lamp error counts recorded. I reset the count to 0 and did a reset. The last monitor error cause was 16 B00014639:12. 16 is the code for backlight error. I tried to power the tv up but went back into error mode.

                > I checked voltages on the power supply board and they all check out .. including 3.28 volts at the error pin.
                > There is power to the cpu and T-CONN and no faults found there. The cpu has a flashing...
                01-24-2025, 11:51 PM
              • Loretto
                Samsung SMPS BN44-00339A
                by Loretto
                Hi all,
                this unit comes from a samsumg LCD TV LE32C530F1W which stopped working after making a strong noise like something was exploded inside of it.
                I opened it and found that fuse FP801S was blown, capacitor CP814 was completely disintegrated and MOSFET QP801S was shorted.
                I replaced all of them and instead of the fuse I connected a 100 Watt bulb. Then, without connecting it to other TV boards, I switched it on, but the bulb begun to blink.
                I thought that maybe the bulb was somehow interfering with the normal operation of the power supply, so I replaced it with a fuse,...
                03-29-2025, 08:30 AM
              • Loretto
                Samsung SMPS BN44-00339A
                by Loretto
                Hi all,
                this unit comes from a samsumg LCD TV LE32C530F1W which stopped working after making a strong noise like something was exploded inside of it.
                I opened it and found that fuse FP801S was blown, capacitor CP814 was completely disintegrated and MOSFET QP801S was shorted.
                I replaced all of them and instead of the fuse I connected a 100 Watt bulb. Then, without connecting it to other TV boards, I switched it on, but the bulb begun to blink.
                I thought that maybe the bulb was somehow interfering with the normal operation of the power supply, so I replaced it with a fuse,...
                03-28-2025, 10:28 AM
              • stylishconsultant
                un60j620dafxza - Samsung No Display Problem
                by stylishconsultant
                Hi All,

                Need help.

                I have a samsung un60j620dafxza led tv. When I plug it in it has no display, no sounds, and no standby lights.

                So I opened the tv and disconnected the power to the mainboard and the backlight powered up. This according to many people says that this is a mainboard
                problem. I checked the voltage coming from the stb and I read 1.3 volts on pins 1,3,5 and 7 which are low volts instead of 13 volts which i think the lcd panel
                might be drawing too much power from the power supply that it prevents the right voltage going to the mainboard....
                09-04-2024, 03:26 AM
              • Loading...
              • No more items.
              Working...