LG SJ4 Soundbar stuck in loop

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mstaglicic
    New Member
    • Oct 2017
    • 9
    • Croatia
    #1

    LG SJ4 Soundbar stuck in loop

    Hi,

    I have an LG SJ4 Soundbar which stopped working. When I press button to turn it on, it load only Optical mode. After few seconds LED start cycle from all inputs around and then I cannot even turn it off by button or remote, only by unplug cable from jack on rear side.
    When I turn it on again it is in the Optical mode again for few seconds then again LED goes in cycle and it is not respond to any button or remote control .

    Is there any reset combination ( I havent found any ) or maybe some other option to solve this problem ?


    Thanks
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Daniel Larsson
      Firmware file for LG SK10Y Soundbar stuck in Please wait loop needed
      by Daniel Larsson
      Hi,

      My LG Soundbar, SK10Y, has somehow ended up in an endless "PLEASE WAIT" loop and I am now starting to suspect that the firmware is causing this, and I can't manage to connect via the app to push a new firmware in as it never really starts.


      I can trick it to start via HDMI ARC and it actually starts up, flashes OPTICAL and then goes to ARC where the sound (including sub) is perfect, but the white led indicator keeps blinking and after 20 seconds it says "GOOD BYE" and shuts down.
      During these seconds the function button is not working...
      2 Photos
      08-13-2025, 10:29 AM
    • ashtastic
      Samsung Soundbar HW-K550 stuck in power cycle loop
      by ashtastic
      Hey All!

      Having an issue with a soundbar (Samsung HW-K550) wondering if you guys could help. When you plug it in, it immediately starts a 2 second power cycle, where it will turn on, then off 2 seconds later, then on, over and over. I checked the output from the power cord and the adapter which seems to be fine.

      I can't find a service manual for that exact model, but I'm wondering where to start to look for issues... I have a scope and all the tools required to potentially fix it, but just not the knowledge

      I can post pics of the board/power supply...
      08-08-2020, 09:30 AM
    • nono34
      Hisense stuck in Colors cycle like test pattern.
      by nono34
      Hello,

      I accidentally changed the project ID in the service menu of my Vidaa Hisense 100U7KQ TV. When I turn on the TV, the screen displays an RGB color cycle (test mode???). I contacted Hisense, and they sent me a usb_MTK_9618.EU.bin file, but it doesn't work. I can see that the USB drive is being read, and it flashes for about 10 minutes (the screen remains in the color cycle during the firmware reading), then the TV turns off and restarts, but still in the color cycle mode.

      I want to mention that the 4GB USB is formatted in FAT32 MBR. I've also renamed the file to...
      10-24-2024, 04:31 PM
    • Stunt
      Hp Laptop Stuck on Hp protected by hp sure start screen
      by Stunt
      Hi guys i've got an Hp laptop Zbook 17 g5 Stuck on Hp protected by hp sure start screen.
      I have tried almost every bios available on various platforms about this laptop but the problem is still the same.
      I even successfully build my own bios using the one from the Hp website but the problem the laptop still getting stuck there.
      Even if i try to press Esc key nothing happens. I tried f10 it doesn't go to bios still stuck there i just saw entering setup menu on the bottom left corner of the
      screen that's it and stuck there. I left it until the following day and i still...
      09-02-2025, 01:51 PM
    • Yanleb
      Samsung 4K UN55NU7100F stuck in a reboot loop
      by Yanleb
      Ok, I have this Samsung 4K UN55NU7100F that is stuck in a reboot loop.

      I know this is not a backlight issue since when I disconnect the power cable from the main board the power supply starts and the backlight is working just fine. Each of the 6 LED strip connectors measure 116 volts.

      I've found that when I disconnect any one of the two LVDS cables going from the main board to the LCD panel (it doesn't have a T-CON board) it is working just fine (with no picture as you can expect).

      On a few occasions I found that reconnecting the disconnected LVDS...
      03-19-2022, 02:13 AM
    • Loading...
    • No more items.
    Working...