Philips HTS7140 Tin / Canned sound problem.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Moreno83
    Badcaps Legend
    • Jun 2014
    • 2008
    • The Netherlands
    #1

    Philips HTS7140 Tin / Canned sound problem.

    Hey guys ,

    I have a problem with my soundbar that i repaired last year. The speech/talking sounds very "canned". Like i blew up the speakers.
    Also the sound goes up and down in volume and these problems are only there when i watch tv. Hdmi arc or aux does not solve the problem.

    Its not my tv or sound setting because i tried 2 other tv's and reset the bar to its factory defaults but that does not help. Any suggestions?

    Ps , the sound via bluray is perfect!!

    Can this be a capacitor issue on a board or a processor problem? Hope to fix the bar once more.
    I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!
    Tags: None
    • Moreno83
      Badcaps Legend
      • Jun 2014
      • 2008
      • The Netherlands
      #2
      Re: Philips HTS7140 Tin / Canned sound problem.

      Btw , i have not opened the soundbar. I noticed it tonight because someone mentioned it. ( probably used to it? ).

      Its also more bass then treble but its not there with a music dvd/bluray.
      I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

        Comment

        Previous template Next

        Related Topics

        Collapse
        • janos6662000
          Philips 47PFS7509/12 LCD TV problem
          by janos6662000
          Hi

          I have here a Philips 47PFS7509/12 LCD TV which came to me with a weird problem : without signal i could access menu, make a factory reset, access menus, etc.
          When i applied cable signal to check image, i had normal picture, but TV was restarting.
          I downloaded original firmware and applied the update, but the problem remained.
          From a colleague i received a "factory package software" which is a lot bigger.
          I made another firmware update, but still did not solve the problem.
          Somewhere on the way the error got worse, because at the moment the...
          08-12-2025, 12:54 PM
        • hugocarmo
          Panasonic TX-24A1UN CRT Sound and Input problem.
          by hugocarmo
          Hi.

          I´ve been given an old CRT from Panasonic, it´s almost new, it was storaged and almost not used since bought.
          It is imaculate inside, almost no dust or debris inside.
          The picture is good, but I have no left sound channel, I tried all the inputs, outputs, even on headphone jack. In AV2 I hear sound from right channel but no image, on tv tuner only right sound channel, the same for AV1.
          So I started to look for a service manual, I found one, and started from the beginning.
          Most of the times the caps are the problem so I orderer all the caps for all boards,...
          04-26-2025, 07:45 PM
        • aidanmo
          Philips 43PUS7506/12 - Loud blown out sound
          by aidanmo
          Hello,

          I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
          I thought maybe the speakers got damaged, so I replaced them - no dice.
          • Using the internal speakers, it always happens.
          • Using the headphone jack, it never happens.
          • Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
          ...
          02-28-2025, 03:13 PM
        • courtcircuit
          Philips HTS8000 home cinema noise problem
          by courtcircuit
          Hello

          I have since a long time a Philips HTS8010S/01 which has been old but was doing the job.

          Since a few days, it starts by making a weird "static" nois when switches on for a few seconds to a minute and then works like a charm.
          Noise loudly outputs from the 3 channels, even if no signal is sent by the controler.DVD to the subwoofer/amp unit.

          I was thinking of a soldering that was starting to be damaged and that was only doing the job after a few seconds of heating, most probbaly on the power board
          Removed each of tyhe boards
          ...
          02-08-2025, 08:22 AM
        • computeka
          Macbook Air A2337 820-02016-07 No sound problem
          by computeka
          How about everyone, I have a MacBook Air which did not turn on, it had a lot of corrosion on the card where the sound plug and the fingerprint go, I have replaced it and the device now turns on but has no sound, if I connect a headphone through the plug, yes There is sound but the external speakers do not sound....
          1 Photo
          05-08-2024, 10:26 AM
        • Loading...
        • No more items.
        Working...