Announcement

Collapse
No announcement yet.

Does ANYONE Know How To Do This?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Does ANYONE Know How To Do This?

    I need to hook up an intercom system up for a lady. This is the ONLY thing I cannot figure out how to do! She wants it to where you call an extension, it goes to the loudspeakers, which are hooked to a stereo receiver. She said her son hooked it up but needs me to re-hook it up. The problem is, I'm absolute shit with phones so I am taking a shot in the dark here. The last time I seen a phone that she had hooked up, there was a white/brown and a brown wire from a rj45B hooked into the rj11 plugin. From there it looked like her son somehow converted the two wires white/brown and brown into an audio wire. :o

    Just taking a shot into the dark to see if anyone has done this before. I'm sure there is a lot more for me to do as far as the intercom system goes.

    #2
    Re: Does ANYONE Know How To Do This?

    Are you sure "intercom" is the right word for this function? It sounds more like a "paging" function.

    What kind of phone system are we talking about here? Is there a PBX? Or a PC acting as a PBX? Or what? You will probably need to get pretty specific to get good help.

    Comment


      #3
      Re: Does ANYONE Know How To Do This?

      Pictures of what were used (any black box, swithes, etc.) when her son did the setup will help also.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      Working...