Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Help in recognizing the components on the BOSE amplifier board

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help in recognizing the components on the BOSE amplifier board

    Hello, I have a problem recognizing the elements marked with blue dots, unfortunately BOSE does not provide any boardview. What could it be? Foil capacitors?

    BOSE board number: 283394-001

    Thank you
    Attached Files

    #2
    I'll take a wild guess here. Since it's burnt ...I would say it looks like a surface mount power resistor. The one below it looks unburnt. Put your ohm meter across the chip and see it it reads ohms. Also measure both ways swapping the test leads. It might be a Diode. Just My $.02 worth.

    Also, I notice in the upper right hand corner at the end of the string of Big Caps, there is another SMD that looks like the one you show burnt marked in Blue. I see a + sign on the board next to it. Could also be a Cap????

    Maybe some one else could offer some more info here.
    sigpichttps://www.badcaps.net/forum/image....ine=1697924519

    Comment


      #3
      I'm almost certain they are SMD film caps.

      Comment

      Working...
      X