Hello, I'm tinkering with this amplifier. The 'Current Drive' light doesn't come on, and the relay doesn't power on either.
I've identified a possible issue—I think—where Pins 3, 6, 12, 13, 15, and 16 have a positive voltage of 22V. However, Pin 18 shows 0 voltage, and Pin 17 registers -1V.
I'm considering replacing the SVI 3205 IC, but it costs 50 pounds. Therefore, I want to make sure it's actually dead before purchasing a replacement.
Any suggestions would be greatly appreciated.
I've identified a possible issue—I think—where Pins 3, 6, 12, 13, 15, and 16 have a positive voltage of 22V. However, Pin 18 shows 0 voltage, and Pin 17 registers -1V.
I'm considering replacing the SVI 3205 IC, but it costs 50 pounds. Therefore, I want to make sure it's actually dead before purchasing a replacement.
Any suggestions would be greatly appreciated.
Comment