Pioneer AVIC-F700BT Bad Navi Board

WumpusRX

Member

Join Date: Oct 2013

Posts: 25

Country: United States
#1

Pioneer AVIC-F700BT Bad Navi Board

10-30-2013, 01:06 PM

I have had this stereo for a number of years now. I bought it used and when I tested it I noticed the stereo would not see my IPOD when attached with the proper Pioneer cables. I went through a bunch of troubleshooting guides and nothing seemed to work. I didn't really have to time to mess with it so I continued to use the stereo anyway.

I eventually brought it to an electronics repair store to have them look at. They told me the reason why it wouldn't pick up my IPOD is because of a bad NAVI Board.

I've looked around the internets for a replacement board but cant seem to find one. Are there any diognostic steps I can take to actually determine the root cause of the problem. I really don't want to buy another stereo.

Any help anyone can offer would be fantastic.
Tags: None
tibimakai

Badcaps Legend

Join Date: Jan 2012

Posts: 3680

Country: USA
#2

11-11-2013, 11:09 AM

Re: Pioneer AVIC-F700BT Bad Navi Board

Did you try a Pioneer repair center?
Ask for a quote.
I had a bad Kenwood which would not turn on and the Kenwood repair center replaced the main processor for $204.
Comment
WumpusRX

Member

Join Date: Oct 2013

Posts: 25

Country: United States
#3

11-28-2013, 08:05 PM

Re: Pioneer AVIC-F700BT Bad Navi Board

I was told the cost of parts and labor would be MORE than the stereo itself.
Comment
tibimakai

Badcaps Legend

Join Date: Jan 2012

Posts: 3680

Country: USA
#4

11-30-2013, 02:19 AM

Re: Pioneer AVIC-F700BT Bad Navi Board

Maybe you will get lucky on Ebay with another unit, with some other issue.
Comment

Previous template Next

Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?

by Tynan Dill

I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

Upon bringing it home and plugging it up, it showed a standby light.

I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

The screen seems to blackout and stay black, but with a flashlight I can see the display.

With my Playstation 4 connected via HDMI, and running a game I can hear sound.

Assuming...

7 Photos
- Channel: Troubleshooting TVs and Video Sources
11-22-2024, 01:46 PM
HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen

by m1ch43lzm

Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
05-12-2025, 08:37 PM
TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board

by howardc64
All left and right refers to looking from rear of TV (or looking from front with TV upside down)
- TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
- Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
...
- Channel: Troubleshooting TVs and Video Sources
07-24-2025, 05:17 PM
LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update

by Hakuu

Hi There,

This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

More Details

TV Model - LG OLED77G1PUA

Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
- Channel: Troubleshooting TVs and Video Sources
07-12-2023, 02:37 PM
Samsug washing machine. Power supply DC41-00189a board issue

by Soulzink

Hi everyone,

I am trying to fix a samsung washinmachine power supply main board.
I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
The power supply board reference is the following: DC41-00189a
I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel...
- Channel: Troubleshooting Power Supplies and Power Supply Design
04-19-2025, 06:26 AM
Loading...
No more items.

Pioneer AVIC-F700BT Bad Navi Board

Pioneer AVIC-F700BT Bad Navi Board

Comment

Comment

Comment

Related Topics