Pioneer AVIC-F700BT Bad Navi Board

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • WumpusRX
    Member
    • Oct 2013
    • 25
    • United States

    #1

    Pioneer AVIC-F700BT Bad Navi Board

    I have had this stereo for a number of years now. I bought it used and when I tested it I noticed the stereo would not see my IPOD when attached with the proper Pioneer cables. I went through a bunch of troubleshooting guides and nothing seemed to work. I didn't really have to time to mess with it so I continued to use the stereo anyway.

    I eventually brought it to an electronics repair store to have them look at. They told me the reason why it wouldn't pick up my IPOD is because of a bad NAVI Board.

    I've looked around the internets for a replacement board but cant seem to find one. Are there any diognostic steps I can take to actually determine the root cause of the problem. I really don't want to buy another stereo.

    Any help anyone can offer would be fantastic.
  • tibimakai
    Badcaps Legend
    • Jan 2012
    • 3680
    • USA

    #2
    Re: Pioneer AVIC-F700BT Bad Navi Board

    Did you try a Pioneer repair center?
    Ask for a quote.
    I had a bad Kenwood which would not turn on and the Kenwood repair center replaced the main processor for $204.

    Comment

    • WumpusRX
      Member
      • Oct 2013
      • 25
      • United States

      #3
      Re: Pioneer AVIC-F700BT Bad Navi Board

      I was told the cost of parts and labor would be MORE than the stereo itself.

      Comment

      • tibimakai
        Badcaps Legend
        • Jan 2012
        • 3680
        • USA

        #4
        Re: Pioneer AVIC-F700BT Bad Navi Board

        Maybe you will get lucky on Ebay with another unit, with some other issue.

        Comment

        Related Topics

        Collapse

        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          11-22-2024, 01:46 PM
        • m1ch43lzm
          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
          by m1ch43lzm
          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
          05-12-2025, 08:37 PM
        • howardc64
          TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
          by howardc64
          All left and right refers to looking from rear of TV (or looking from front with TV upside down)
          • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
          • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
          ...
          07-24-2025, 05:17 PM
        • Hakuu
          LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
          by Hakuu
          Hi There,

          This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

          After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

          More Details

          TV Model - LG OLED77G1PUA

          Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
          07-12-2023, 02:37 PM
        • jb_Bak
          Sony xbr-65x900c main board issues?
          by jb_Bak
          Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

          Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
          Power Board Connector that goes to Main board
          CN6401
          Pin 01 NC
          Pin 02 NC
          Pin 03 "BL_ON": 0V
          Pin 04 "N/C"
          Pin 05 "STBY 3.3V": 3.5V
          Pin 06 "GND": N/C
          Pin 07 "AC_OFF"...
          09-27-2021, 04:52 PM
        • Loading...
        • No more items.
        Working...