(Car Audio) Alpine MRD-M1000 amp no errors, but no sound

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 31024
    • Albion

    #21
    Re: (Car Audio) Alpine MRD-M1000 amp no errors, but no sound

    that pic gives me
    Invalid Attachment specified. If you followed a valid link, please notify the administrator
    strange.

    Comment

    • vinceroger69
      Badcaps Legend
      • Mar 2012
      • 6714
      • uk

      #22
      Re: (Car Audio) Alpine MRD-M1000 amp no errors, but no sound

      Originally posted by stj
      that pic gives me

      strange.
      picture opens ok now i think its been edited.

      Comment

      • iFixStuff
        Member
        • Oct 2015
        • 18
        • USA

        #23
        Re: (Car Audio) Alpine MRD-M1000 amp no errors, but no sound

        I've got one in for repair that is receiving intermittent 9v to the power control ic.
        Anybody have a schematic of Alpine MRP-M1000 or anybody know why I'm not getting a constant signalk to the pwm ic?

        Comment

        Related Topics

        Collapse

        • i_am_patch
          Roland KR-3500/4500 Digital Piano. Crackling audio sound on all keys -Fixed
          by i_am_patch
          Hi All. I had a Roland KR-3500 Digital Piano (similar to the KR-4500) that exhibited a Crackling audio sound on all keys. After reading somewhere about someone with a similar issue who had replaced all the Electrolytic caps I decided to also go down that route. (Spoiler : It worked !) After some basic troubleshooting I determined that it could be noise feeding thru from the Keyboard scanning since the Demo tunes played back undistorted and the Audio amp / speakers were fine ( Inserted an Audio signal into the rear Audio input). After extracting the main board from the shield, I replaced 7 Capacitors...
          04-30-2024, 08:20 PM
        • Piaskos
          Dell Vostro 5490 - no sound, no audio device
          by Piaskos
          Hi, i've got problem with Dell Vostro 5490.
          Board - Mantis CML 18788-1

          Windows says "no audio device detected". The other functions work properly.

          What i've done:

          1. I checked motherboard

          2. I changed audio codec (ALC3204)

          3. I reflashed bios with clear ME

          4. Audio is enable in bios

          5. Both speakers are good

          6. After installing the drivers from the Dell website, the devices visible in the manager:
          - Audio for intel displays
          - Intel Smart Sound Technology...
          01-30-2023, 02:58 AM
        • ChaosLegionnaire
          what i went through dealing with my mobo with dead onboard sound!
          by ChaosLegionnaire
          so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

          i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
          09-13-2022, 09:02 AM
        • CapLeaker
          Motorola Minitor V pager no audio / sound repair
          by CapLeaker
          Got a bunch of Motorola Minitor V pagers from Fire Departments here trying to fix some out of the non working ones. These pagers are known for either no sound / audio or they don’t charge. The internet is full of suggestions like metal shavings inside the speaker?
          Anyway so I took one of the Minitor’s apart for my amusement in order to see why that is and nobody can fix em. There are no service manuals or schematics for these that I know of. However… I did find the problem!

          On the main board of this unit where the speaker connects to there is a metal shield....
          06-10-2025, 07:44 PM
        • JRade
          Audio video receiver KENWood KR-V990D,no sound
          by JRade
          When I select the FM receiver, I find a radio station, the sound is heard on REC OUT(L,R), REC TAPE1(L,R),REC TAPE2(L,R) on high-ohm headphones, the sound regulation does not work.
          The output reacts when I connect the record player to PRE OUT FRONT L, the sound is heard in the speaker but the sound regulation does not work. Then it does not matter what I chose on the front selector.
          I replaced the capacitor C303/0.047F, nothing changes.
          I'm asking for help, what should I do next?
          Thanks in advance!...
          08-05-2025, 10:23 PM
        • Loading...
        • No more items.
        Working...