EV Evolve 50 no sound from any input.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rotorcraft230
    Member
    • Jan 2015
    • 27
    • USA
    #1

    EV Evolve 50 no sound from any input.

    So I usually only work on guitar tube amps but a friend ask if I could look at his EV Evolve 50. It has no sound coming out if it from any input. I'm assuming it's a power amp problem. The unit power up, I did pull the amp out slightly and did see some LEDs lit up.

    Aux15v on. Lit
    SMPS. Lit
    Amp on. Lit

    Don't know where to start!!

    I did have something odd, the large cap 220uf 450v had 66VAC AND 52 VDC on the top exposed part where the expansion lines are.

    I'm going to post this and figure out how to post pictures.

    Thanks
    Successfully fixed: Sanyo 42" LCD, Sony 52" Bravia XBR9,
    Tags: None
    • Rotorcraft230
      Member
      • Jan 2015
      • 27
      • USA
      #2
      Re: EV Evolve 50 no sound from any input.

      Can someone help me on how to post pictures?

      Thanks
      Successfully fixed: Sanyo 42" LCD, Sony 52" Bravia XBR9,

        Comment

        • UNITRAX
          Senior Member
          • Jan 2023
          • 64
          • POLAND
          #3
          Re: EV Evolve 50 no sound from any input.

          Originally posted by Rotorcraft230
          Can someone help me on how to post pictures?

          Thanks
          https://www.badcaps.net/forum/showthread.php?t=1868

            Comment

            • Rotorcraft230
              Member
              • Jan 2015
              • 27
              • USA
              #4
              Re: EV Evolve 50 no sound from any input.



              Attached Files
              Successfully fixed: Sanyo 42" LCD, Sony 52" Bravia XBR9,

                Comment

                • Rotorcraft230
                  Member
                  • Jan 2015
                  • 27
                  • USA
                  #5
                  Re: EV Evolve 50 no sound from any input.

                  ill take better pictures when I get home.

                  anybody seen a link or have a copy to a service manual? I may be able to work my way through it if I had one.

                  thanks
                  Successfully fixed: Sanyo 42" LCD, Sony 52" Bravia XBR9,

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • hugocarmo
                      Panasonic TX-24A1UN CRT Sound and Input problem.
                      by hugocarmo
                      Hi.

                      I´ve been given an old CRT from Panasonic, it´s almost new, it was storaged and almost not used since bought.
                      It is imaculate inside, almost no dust or debris inside.
                      The picture is good, but I have no left sound channel, I tried all the inputs, outputs, even on headphone jack. In AV2 I hear sound from right channel but no image, on tv tuner only right sound channel, the same for AV1.
                      So I started to look for a service manual, I found one, and started from the beginning.
                      Most of the times the caps are the problem so I orderer all the caps for all boards,...
                      04-26-2025, 07:45 PM
                    • Sushi1808
                      Onkyo TX-NR609 Sound only on USB/Internet Radio/DLNA Input
                      by Sushi1808
                      Hi everyone!

                      I turn to you in hope someone could point me in the right direction since I lack knowledge and experience in diagnosis of audio equipment. (My experience is in computer chip level repairs.)

                      I bought an Onkyo TX-NR609 receiver which initially produced no sound on speakers/headphones, there was no delayed relay click, speaker matrix icon didn't show up, USB/NET stuck in "Now initializing", instead of DSP/1st NET firmware version there were ?????????...

                      There was flux residue around the D830K013BZKB4 DSP chip (Q3001) on the HDMI...
                      07-01-2023, 07:53 AM
                    • ugamazing
                      820-02020 Super Weird Issue: Keyboard Input Character Map "Wrong"?
                      by ugamazing
                      So, I have a really bizarre issue that I'm struggling to identify the cause of. Working on an 820-02020 board with some bizarre keyboard/input-source character mapping. My suspicion is a possible damaged SPI ROM (U1970), perhaps, but I'm really not sure in this case:

                      1. The issue is pretty weird, but when installing MacOS, I noticed my WiFi password did not work. I quickly realized the special characters (!@#$%^& etc) were not mapping correctly.

                      2. I noticed the keyboard layout/input-source is defaulting to JAPANESE every single time I restore the board. I am not...
                      04-10-2024, 08:06 AM
                    • LEECH666
                      Grundig Vision 9 37 9880 T USB (Chassis SR) TV Repair Help - Distorted Subwoofer Sound and overall weird sound waveforms
                      by LEECH666
                      Good day ladies and gentleman!

                      I am currently trying to repair a Grundig Vision 9 37 9880 T USB LCD TV for a friend that has a weird audio problem. Basically everything works fine except for the heavily distorted sound when the Subwoofer module is connected and there is a buzzing sound coming from the PSU PCB.

                      This seems to be a rather rare TV so there is not much prior on topic help to be found however a service manual is available at the usual sources (Electro Tanya i.e.).

                      I think the PSU buzzing comes from one of the coils near the bridge rectifier but...
                      01-19-2024, 05:46 PM
                    • japlytic
                      Not all TVs can handle surround sound on a HDMI input
                      by japlytic
                      With a home theatre PC connected to a TV via HDMI, Windows reveals that the TV only supports stereo sound even though the TV has a HDMI ARC connection to an AV receiver which is powered on; I also had an issue that the AV receiver does not always retain the input setting for routing the HTPC video through to the TV in standby.
                      So I connected a second HDMI cable to the HTPC and set it to duplicate the video outputs, but I had random audio dropouts when playing content with surround sound being passed to the AV receiver (dropouts did not occur when I replayed the content where it dropped...
                      08-31-2022, 10:09 PM
                    • Loading...
                    • No more items.
                    Working...