Trying to revive a NINJA OL501Foodi 14-in-1, 6.5-QT Pressure Cooker Steam Fryer with SmartLid

[KYBOSH]

Sweet! You wanted to how how you fix such a thing, now you know. LOL. Did the wire got jammed somehow or is it right at the kink where the lid opens and closes all the time?

According to the internet the wires are made of aluminum rather than copper. That coupled with the fact that its zip-tied TIGHTLY to the wire strain relief is a recipe for mechanical failure at some point. I cant imagine this unit was used very often. Probably no more than a dozen uses. I was going to replace the wires but figured its too much work for something like this. At least if it happens again I'll know what to do and how to do it. Thank you everyone for your input and suggestions.

Im looking for my next project now!

[redwire]

Ninja attack wiring! SLASH
The lead dress in these is usually a mess, so putting them together can pinch wires. Need tie wraps etc but that costs money.

[CapLeaker]

Ninja attack wiring! SLASH
The lead dress in these is usually a mess, so putting them together can pinch wires. Need tie wraps etc but that costs money.

I got the Ninja slow cooker and man does this thing crank out some yummy meals.