LG dreyer control board no powah.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • asand1
    Oregon, USA
    • Oct 2011
    • 123
    #1

    LG dreyer control board no powah.

    I have an LG frontloading dreyer #dre2050W (210v)that doesnt turn on when hitting the power button, however the light inside the drum is on. Reserching leadsd me to believe the control board #EBR36858801 itself is bad, as it is a common problem. Looking at grainy pics on the web, I can see a transformer, caps, and maybe a bridge rectifier, on the board. What would you focus on first, assuming the power to the board is good? Ill tear into it and post pics tonight.
    Attached Files
    Last edited by asand1; 12-27-2011, 01:59 PM.
    Tags: None
    • PCBONEZ
      Grumpy Old Fart
      • Aug 2005
      • 10661
      • USA
      #2
      Re: LG dreyer control board no powah.

      Originally posted by asand1
      What would you focus on first.
      On the board:
      First look for bad solder joints and bad caps.
      .
      Mann-Made Global Warming.
      - We should be more concerned about the Intellectual Climate.
      -
      Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
      - Dr Seuss
      -
      You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
      -

        Comment

        • asand1
          Oregon, USA
          • Oct 2011
          • 123
          #3
          Re: LG dreyer control board no powah.

          Found a service manual, hopefully it will help.


          Attached Files

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              ORIGINAL POWER SUPPLY BOARD
              7 Photos
              11-22-2024, 01:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • Yanleb
              LG 60PK550 Logic Control Board EBR63450301
              by Yanleb
              Hi all, I just want to share the repair of my 60PK550-UA TV set.

              The TV set was powering on, just no image. After verification, nothing wrong on the YSus or ZSus boards. Nothing wrong on the main board either.

              But I noticed that the LED was not flashing on the Logic Control Board. This is an EBR63450301. The LED is supposed to flash even with all the flat cables disconnected, with only the power cable attached.

              All the voltages measured at the electrolytic capacitors on the board were good. From top left to bottom right:
              C57: 3.30V
              C61:...
              07-20-2023, 12:38 AM
            • sam_sam_sam
              Linear Garage Door Opener Control board took a crap install a new control board back normal
              by sam_sam_sam
              I have been having issues with this garage door opener for a while first the range of the remote was a lot less and sometimes it would start to go down and stop for no reason that I could find and would every once in awhile to start with then it started going more frequently until last Saturday when I opened the garage door it refused to close so I cranked up force all the way maximum limit this did not work also the sensor on one side that has a green and red lights that are supposed to be on when the door is open and there are no obstacles in the way on the original board the only light that...
              02-08-2025, 06:52 AM
            • redoxy
              Control Board Replacement for 2K display
              by redoxy
              I am looking at the option of replacing my control/driver board to one with HDMI and/or Display port input on a 2K LED (I think IPS) screen.

              The display is Samsung LTM270DL07.

              I have tried using the model number to search for a compatible control/driver board but so far my efforts have been futile.

              I am looking for inputs on what board could potentially be used for my display.

              Attached are pictures of the display label information and connectors (CON30 CON40 only) and pictures of the current control board.
              Also attached is a technical...
              03-14-2023, 08:52 PM
            • Loading...
            • No more items.
            Working...