Hi everyone how to identify component 5x=5E or any model look like at XX=XX in computer motherboard ?
-
Could anyone identify Richtek backlight driver from Samsung LTN173KT01?
There is only "CZ=EL 12M" mark on it. Thank you very much! -
Hy guys , i have a DVR board DS-80104 REV 2.2 that was powered wrong, i have some smds on the board that are blown and i can't identify them , maybe if someone has this board somehow and we can identify the smds', i have searched online and i can't find a schematic.
The smds are SOT-23-6 , one of them i think it has the marking ADJF since i found another one on the board with this marking , but the other one it seems that it starts with AG or it looks like. I would really apreciate if someone could help me identify those IC's .
... -
Hi gang, its a long shot, but working on Lenovo Legion Pro 7 motherboard NM-F091, and trying to identify this component near GPU with marking "eHFQH" that is burned and shorting the board. Looks like power management IC
I couldnt find any schematic or boardview. The CPU side also has same chip. Any way to identify this chip? or take measurements from the good chip to determine what it is?
Any help would be appreciated... -
I mistakely pluged 100v japanese retro game console to 220v outlet.
So It seems that glass fuse and varistor have been blew up.
I can identify that voltage and ampere value of glass fuse(250V LF 1.6A),but It is impossible to identify varistor type in my sega saturn PSU(YAMAHA 35M07U XR258)
Is there any way to identify varistor type in my sega saturn PSU?
Any reply would be appreciated.
EDIT:
It seems that I finally found out what type this black varistor is. It is Panasonic ERZV05D221 “ZNR” Transient/Surge Absorbers (Type D) Varistor Voltage... -
This project was inspired by PolloLocos GitLab project from here : https://gitlab.com/polloloco/fujitsu-bios-unlocker.
I write an "User friendly" program what works offline.
Unpack the two files in the same directory then run FSUnlock_NEW_GUI.exe.
The first two groups (203c-d001-) are auto-completed and after that you must type just the characters because dashes are auto-completed as well.
Hit Enter or click on "Generate the master password".
Don't forget to clear the Supervisor password after entering the BIOS with the same...
Comment