Where to source components from?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Proserot
    Member
    • Mar 2022
    • 19
    • Deutschland

    #1

    Where to source components from?

    Where can you buy components such a MOSFETS from notebooks?
    I found one seller but they have a ridicolous shipping fee (or big order)

    im more or less looking for a vishay ZF906 MOSFET but different ones for sure are to follow.

Related Topics

Collapse

  • Sam Scarbo
    Sparkle 1200W PSU MAGNA Model: SPM1200AXJ8 - Broken. Need help identifying components. Any schematics available?
    by Sam Scarbo
    My Sparkle (SPI) PC power supply has broken. Originally, there was totally no power output. The 5V-standby was not there. I have replaced a few bulged capacitors but not helping.

    I was trying to do more troubleshooting but burned more components. Some got burned so badly that the markings were gone. And also, the markings of a few transistors were gone because the component surface was worn out somehow.
    If you happened to have disassembled the same PSU model, please help to provide the markings of some of these components.

    See the attached two pictures of the small...
    09-18-2024, 08:29 AM
  • User2025
    Please help to identify the components on Surface Laptop GO3, model 2013, i5-1230U
    by User2025
    Hi,

    I am working on a Surface Laptop GO 3, which is the new release 2024 with a i5-1230U processor. Originally, it had a 256GB SSD, then the owner attempted to upgrade it to 1TB SSD by himself. "Surprisingly", it did not boot afterwards, then changed back to the original SSD, did not boot either.

    It turned out to be that just a couple of components had been knocked off when the owner was trying to get off the SSD cover with his beloved screw driver.

    I do not have another board of same model. Although I have a Laptop Go 2, the layout of that bit...
    04-29-2025, 04:13 PM
  • Lvsitano
    Asus X532FL 3.2V at source and gate
    by Lvsitano
    I am having some trouble with troubleshooting a Asus X532FL rev 2.0 motherboard, which does not power on. So at the first MOSFET, I am getting 19V at the drain, and then 3.2V on both gate and source (compared with ground). Of course, the 2nd MOSFET's source will have 3.2v at source.

    First MOSFET is a QM3056M6 and 2nd MOSFET is a QM0930M3

    I already checked first MOSFET and source and gate are not shorted (drain with source not shorted either). Also I have 1.7V at the LDO rail (measured at the keyboard connector, as the power button is on the keyboard).

    First...
    06-26-2024, 02:13 PM
  • tantr13
    Lenovo Ideapad 5 14ITL05 not powering on
    by tantr13
    Hi everyone,
    This is my first post so I'm hoping to get some help on this awesome forum. As a preface, I'm an amateur at electronics, especially troubleshooting complicated devices like laptops. However, I'm trying to develop a skill for it so I can learn how these devices work and how to repair them without continuing the wasteful tradition of throwing them away and buying new. 🤮

    I've had a Lenovo Ideapad 5 14ITL05 for a few years now, with motherboard LA-K321P. I would never leave it plugged in unless I was using it, and always turned it off after I was done, but last week...
    06-28-2024, 06:28 PM
  • summerwhite
    DJI Mini Pro 3 missing components near camera connector
    by summerwhite
    I have a DJI drone that is not displaying a video feed anymore after a repair.

    When tearing down the DJI drone to fix the armature there was some hot glue next to the camera connector that i had to remove.

    Now there are missing components either because they got pulled off or because they where never placed.

    I have two reference images from XXZ and a photo of mine.

    I'm truely hoping someone has another DJI Mini Pro 3 that they can help me identify what these components are and if they are necessary.

    On the board view from XXZ they...
    04-06-2025, 11:15 PM
  • Loading...
  • No more items.
Working...