Looking for a replacement momentary switch for a 230v power tool but the only type I can find that not only looks the same but will also fit into the housing is rated 20A @ 12v and 15A @ 24v.
Will this be fine?
Will this be fine?
-
-
Re: Switch selection
Just realised it may not be a 240v switch, will have to wait until I have the tool to investigate further. -
Re: Switch selection
Most power tool switches are not simple switches, but have regulator inside their housing.Useful conversions. I don't "speak" imperial. Please use metric, if you want to address me.
1km=1000m=100000cm, 1inch=2.54cm, 1mile=1609.344meters, 1ft=30.48cm 1gal(US)=3.785liters, 1lb=453grams, 1oz=28.34gramsComment
-
Re: Switch selection
If it is a battery operated tool that variable speed most of them have small circuit board on the switch housing or it external of the switch
But the switch is not a normal type of switch it has multiple switching contacts that have certain travel points for the different speeds
I have use the speed controllers from battery operated tools ( for other purposes ) before but you need to be careful not to hook up the battery power in the wrong way because it not forgiving at all and you will let out the factory smoke and then it all over
I also seen the ones that are 120 volt ones but they are a different puppy altogether and they are not very easy to repair because of having a hard time getting the parts ( sometimes the motor winding are either shorted or the winding is open depending on how the switch failed )Last edited by sam_sam_sam; 02-24-2021, 01:20 PM.Comment
-
Re: Switch selection
pictures, or it didnt happen!
Comment
-
Re: Switch selection
This switch is def a standard momentary (normally open) type switch. Its a straight forward off/on state, a pivoted pull handle activates the tool and cuts out when released (safety feature).
The tool is 230v mains operated but I am yet to investigate the wiring / circuitry arrangement to confirm power at the switch.
Thanks for your input guys, appreciate it!Comment
-
Great to be here! I'm a newbie here trying to find a "micro", momentary push switch to repair a Sony "clamshell" video walkman. This micro switch has long since discontinued by Sony, however I hope there are third-party switches of the same size and functionality that I might be able to source to play the same role. The purpose of this switch is to tell the video walkman that the user has activated the mechanical tape eject button, turning that physical action into an electronic signal that tells the tape transport mechanism to open so one can load or eject a video tape. I... -
This specification for the Acer Switch Switch V 10 SW5-017P Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Switch V 10 SW5-017P boardview and Switch V 10 SW5-017P schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...09-06-2024, 05:30 AM
-
HP DMI Tool is used to Extract DMI information from a HP BIOS Bin.
DISCLAIMER: badcaps.net and its members do not support unlocking stolen or company-owned devices.
The DMI Tool given here are for personal use only.
************************************************** ***********************************************
DISCLAIMER: THE HP DMI Tool IS FREE AND ARE INTENDED FOR EDUCATIONAL PURPOSES ONLY.
You CAN download it, use it.use it.I only ask that you DON'T modify it ,sell it or try to make a profit
from it, and that you please credit the author... -
Hi all!
HISENSE 65E7KQ PRO
RSAG7.820.13512 - chassis
MT9618BAATAB - cpu
RSAG7.820.12059 - power
HD650Y3U77 - panel
KLM8G1GETF - emmc
The TV does not turn on, the standby indicator is on. All voltages are present.
Emms is dead. Not readable, not detected.
Replaced emmc.
But with another dump there is no launch
Terminal log
UART
<
AC_ON
RPMB key is not yet programmed
HASH1_VERSION=0x00000000 64bit
E-B
FDE enabled
layout pattern onebin by SAR7,0... -
Hello,
I've been working on a NEC TurboExpress and I accidentally got the plastic inside the power ON/OFF switch too hot while doing other repairs and melted it. At first, it would still power on when sliding the switch, but you had to really press inward while sliding to get it to work.
I removed the switch component and tried to gently melt the plastic back so it would work more reliably and all I managed to do was make it worse.
I need to find a replacement On/OFF switch for this, but having some trouble figuring out which kind of switch I need....
Comment