I have two of these and used the working one to do a comparison measurement. Oddly everything seems to be identical in value when measured. I even did a diode mode measurement (+ probe on - battery terminal) of all components and the ic. The values are the same between the two.
Only difference I’ve noticed is as follows:
Working one:
12v on C of NPN transistor
Press button
0v on both B and E
Bad one:
12v on C of NPN
Press button
1.5v on B
1.1v on C
But the transistor measures good and has same values of working one
Any idea on this?
Only difference I’ve noticed is as follows:
Working one:
12v on C of NPN transistor
Press button
0v on both B and E
Bad one:
12v on C of NPN
Press button
1.5v on B
1.1v on C
But the transistor measures good and has same values of working one
Any idea on this?
Comment