Hai Guys I can't tell what these figs and letters mean on my faulty Mosfet
7DON65F
1 726
thats how they appear.I need know what its equivalent is too.
7DON65F
1 726
thats how they appear.I need know what its equivalent is too.
-
-
Re: Reading MOSFETS
Hello lameck chililaOriginally posted by lameck chililaHai Guys I can't tell what these figs and letters mean on my faulty Mosfet
7DON65F
1 726
thats how they appear.I need know what its equivalent is too.
This polish link
http://translate.google.co.uk/transl...n65f%26hl%3Den
seems to be saying that the one you are looking for is 2SK2996
heres the datasheet
http://pdf1.alldatasheet.com/datashe...A/2SK2996.html
bob -
Re: Reading MOSFETS
Thanks a lot Bob I'll try to look for it.Comment
-
Hi, I'll start by saying that I'm not an expert and I've reached a point where I don't know what to try/do anymore...
Starting from the beginning: I opened this subwoofer for the first time with a very strong smell of burnt electrical components, I realize that on the amplifier board there is a hole between V+ OUT and GND about the size of a finger, the damaged components were the shorted mosfets, two damaged zener diodes and two capacitors. I bought everything, I fixed the hole by cutting the pcb and putting a piece of a perforated board.
I had no problems connecting mosfets and capacitors,...08-27-2024, 12:46 PM -
Hi,
Finally got time to fix this board up.
At first it didn't give any POST codes. Turns out it was an unsupported Celeron D cpu. After dropping in an Celery 2.6gHz the CPU came out of reset with clock signal, but still no post codes. For a while it did work when I applied pressure to the ADP3168 chip, but on next reboot the MOSFETs started to burn. Then I left it as is for months.
Now I came back prepared. Replaced the bad MOSFETs and the ADPxx18k drivers. Now I don't get any MOSFETs blowing up issues anymore. But sadly, the Vcore is missing. The whole VRM isn't... -
Hi!
Managed to get a Gainward Phantom GTX 980 in an auction for a bin with components.
No video out so I started fault finding and found a blown fuse for 3 mosfets. Started checking for shorts and found what I think is a short through all of those 3 mosfets; 0.1 ohms between "VIN" input and "VSWH" output. All mosfets in this gpu are the same ones (NCP5369) with integrated drivers and when I tried measuring the other ones through these ports they were somewhere in the kilo-ohms range.
So, could I safely assume all of these 3 mosfets are... -
Hi everyone. I used Acer Travelmate 6292 with BIOS v.13112, Santa Rosa 1436 (VGA Bios version). This BIOS supported title letters for creating password on HDD.
A week ago an element on textolite burnt and I cant turn on laptop.
I thought that title letters support different types of BIOS.
I tried my new laptop lenovo and my friends old Acer and to regret nor mine nor his laptop doesnt support title letters in
Standart HDD 2,5 inches.
How can this problem be resolved?
Lots of BIOS versions of different types of laptops support title letters in password?...05-18-2024, 03:51 AM -
I got a 15-IIL05 that failed to turn on BUT IT DID TRY TO TURN ON and then turned off after 30+- seconds, i disassembled it and found a screw loose inside the case.
With charger it turns on, fan spins but gives no image.
Tested main mosfets no short, tested 3.3v,5v,DRAM, CPU etc and they were present.
Reflashed BIOS, same problem.
Replaced both main mosfets.
Checked main mosfets again and i noticed that they closed once the laptop shut down, so i decided to bypass them and used a bench PSU to check how much power the laptop was drawing while trying to turn on, 20v@3A,...
Comment