Can't find stupid FFC. But I have an idea

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Uranium-235
    Comrade Glimmer
    • Aug 2007
    • 5042
    • US
    #1

    Can't find stupid FFC. But I have an idea

    I've worn out the connectors on the FFC for my yamaha from the front panel board to the preamp board. It's 152mm length, 1mm pitch, 32 connectors, opposite side connectors. Mouser has them all on order, with 1000 minimum order. I've looked through google, and found few leads to being able to get them here in the US for those specs.

    could I get two 16's with the same specs and place them side by side? would they overlap the connectors on the edge next to each other and create a single insulated contact?
    Cap Datasheet Depot: http://www.paullinebarger.net/DS/
    ^If you have datasheets not listed PM me
    Tags: None
    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 30978
      • Albion
      #2
      Re: Can't find stupid FFC. But I have an idea

      link?

        Comment

        • jazzie366
          Badcaps Veteran
          • May 2016
          • 304
          • United States
          #3
          Re: Can't find stupid FFC. But I have an idea

          Originally posted by Uranium-235
          I've worn out the connectors on the FFC for my yamaha from the front panel board to the preamp board. It's 152mm length, 1mm pitch, 32 connectors, opposite side connectors. Mouser has them all on order, with 1000 minimum order. I've looked through google, and found few leads to being able to get them here in the US for those specs.

          could I get two 16's with the same specs and place them side by side? would they overlap the connectors on the edge next to each other and create a single insulated contact?
          Everyone's saying it's all 0.5mm, however the connector it goes into is 1mm pitch. Manufacturers are advertising these cables for 12 cents each if they are 0.5mm pitch. I can't even find this cable anywhere, there is one website that said they had them, but don't anymore.

          Also, if you want 1000 cables, lotta places willing to make them at 12 cents each at that quantity.
          Popcorn.

            Comment

            • Uranium-235
              Comrade Glimmer
              • Aug 2007
              • 5042
              • US
              #4
              Re: Can't find stupid FFC. But I have an idea

              could I combine two 16's without an overlap in the middle?
              Cap Datasheet Depot: http://www.paullinebarger.net/DS/
              ^If you have datasheets not listed PM me

                Comment

                • diif
                  Badcaps Legend
                  • Feb 2014
                  • 6978
                  • England
                  #5
                  Re: Can't find stupid FFC. But I have an idea

                  Have you checked Ali ?
                  1.0mm pitch https://www.aliexpress.com/item/Free...668984203.html
                  0.5mm pitch https://www.aliexpress.com/item/5pcs...799799137.html

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Vesko356
                      [Guide] How to find the right HP bios version to flash
                      by Vesko356
                      First of all thanks to all of our members who have posted previously all methods posted here.
                      Please leave a comment if you find something new,or have anything else to add.
                      -----------------------------------------------------------------------------------------

                      Find by serial number,model number or series

                      If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
                      Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
                      Operating system and OS version.If...
                      08-11-2023, 03:27 AM
                    • CapLeaker
                      Crimping CAT7 connectors high failure rates
                      by CapLeaker
                      I’ve had and got a few projects using quality CAT6 and CAT7 23awg solid copper, shielded, direct burial cable. Each time I use CAT7 connectors, most of them fail making good connections to the 4 wire pairs after crimping. I tied a couple of crimping tools, thinking my crimper is bad. Also used different CAT7 RJ45 connector manufacturers. Same thing. I kinda calculate 6 connectors to make one cable!
                      Get this: I use CAT5 or CAT6 connectors, no problem. Very rare I have a miss crimp with those. So what gives?! ...
                      11-09-2024, 04:11 PM
                    • Cornito
                      TCL 65C715 backlight issue
                      by Cornito
                      Hello team,

                      I'm back with another topic.
                      It's a 65C715 TCL tv with backlight issue.

                      But the problem is a bit strange.
                      When I took this tv from the marketplace backlight didn't work but picture was ok.
                      Back at home I checked with led tester if led are alive and I can find something different in term of voltage supply => nothing

                      Putting all back together the tv worked fine for weeks. => Contact issue??

                      Few moment later the tv has started to have backlight issue back, turning off and on worked sometimes and tv was working....
                      06-09-2024, 02:24 AM
                    • spleenharvester
                      Making a Handskit hot air station a bit less stupid
                      by spleenharvester
                      I bought one of these as it was the only one I could find that is compact enough to fit in my toolbox (though I've since found KSGER make a substantially safer looking one). It's one of those fan-in-handle things that has the 230V element in the handle. Quecoo briefly sold a similar unit but discontinued it.. maybe they couldn't find solutions to these problems. I'm aware these fan-in-handle things are garbage compared to a good air pump station but I only really use this for occasional QFN work etc.

                      I did not realise at the time of buying that its design is... interesting, to say...
                      05-09-2024, 09:09 AM
                    • corrize
                      Where to find a very small fpc connector 0.3mm between 2 pins ?
                      by corrize
                      Hello, I search this connector (oxydated).
                      It's a fpc zif low profile connector. It come from camera sensor, it is very small : 0.3mm between 2 pins.
                      I ordered 2 from Aliexpress called « 0.3mm pitch » but one was 0.5mm between 2 pins and the other 0.6mm. In fact « 0.3mm pitch » seams to be the pad width and not the distance between 2 pins.
                      I can't find it. The other websites like mouser dont show the datasheet, and I can't check if it is 0.3mm between 2 pins ?

                      Do you know how to find this connector please ? What is the exact name for find it ?

                      ​...
                      08-06-2024, 05:25 PM
                    • Loading...
                    • No more items.
                    Working...