How It's Made LED Tubes

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • capwizard
    Badcaps Legend
    • Jun 2016
    • 1991
    • USA
    #1

    How It's Made LED Tubes

    How It's Made LED Tubes
    https://www.youtube.com/watch?v=h-DztJtSFa8

    Illumitex LED Package Manufacturing Process
    https://www.youtube.com/watch?v=AWpI9ld3t_8

    Please push Attached Thumbnail......................Happy Christmas.....
    Attached Files
    Last edited by capwizard; 12-23-2016, 07:01 AM.
    Tags: None
    • sam_sam_sam
      Badcaps Legend
      • Jul 2011
      • 6057
      • USA
      #2
      Re: How It's Made LED Tubes

      That was very cool thanks for sharing the video links

        Comment

        Previous template Next

        Related Topics

        Collapse
        • AustinCER
          Dell XPS 8940 | Manufacturing Mode? | No Service Tag
          by AustinCER
          Hello, I currently have a Dell XPS 8940 in our office for repair.
          Service Tag: HG1Y673
          The most recent BIOS is pictured below -- being available as an .exe on Dell website.

          Needed a new motherboard due to power surge. The motherboard replacement was installed and upon power up it was booting to a display message - Manufacturing Mode Active -

          Have not dealt with this issue before or what the proper steps are. I booted to the BIOS and manually entered the Service Tag, but upon each reboot -- the service tag is wiped and shows the Manufacturing Mode display message,...
          4 Photos
          07-15-2025, 05:28 PM
        • CapThatBrass
          The Mystery of 'Manufacturing Mode' - Dell Motherboards
          by CapThatBrass
          Hi,

          Firstly sorry if this is the wrong forum for posting this question - please recategorize or move to another part of the forum if necessary.

          I've been doing alot of research recently into the world of BIOS editing and building of images, out of curiosity mainly.

          Lots of Youtube videos as well as threads in this forum (as well as others) mention the term 'unlocked' bios which generally means the removal of BIOS passwords from a dumped image to allow full access to the BIOS/UEFI menu. However, a handful mention that a prompt for the Service Tag will...
          11-04-2022, 04:59 PM
        • jlxxxx
          Dell 9310 (2-in-1) bios to fore manufacturing mode
          by jlxxxx
          I have read the FAQ, and other reference here to changing the EC region of the flash image to force entering manufacturing mode.
          How would I modify the dell 9310 firmware in order to force entering manufacturing mode? The goal is to have the computer ask me to enter the service tag after changing the motherboard.
          Can this be completed using the boot-up USB restore method that Dell supports in order to reduce risk of damaging the hardware further? (Ctrl+Esc keys while holding the power button)
          Dell provides this bios here: https://www.dell.com/support/home/en-us/drivers/dri...
          09-25-2024, 02:38 PM
        • DynaxSC
          Each GPU reballing produces different MATS results, looking for root cause ?
          by DynaxSC
          Hi,

          I have an Nvidia card which makes me wondering, what is the root cause for Mats errors. The story is as follows:

          1. When I received the card Mats showed one memory with errors.

          2. Replaced the memory chip, but no change, still same error, so memory chip is ruled out.

          3. Made a carefull reballing of the GPU, MATS showed 3 memories with errors, the one before, and 2 other new chips.

          4. Made a second reballing of the GPU and Mats shows again only one memory chip with errors, the same on as in the beginning.

          5. Made...
          12-11-2024, 07:44 PM
        • elmontador
          LG RL4 (i made a mess)
          by elmontador
          Hello i hope someone can help me i made a mess, i forgot that the board still hot and i knock some resistors out of place , i can't find any schematics or any info, i am uploading a picture with the components i need to put in place i don't need the full manual just the list for the resistors and their value(8 in total), if someone can help i'll be thankful...
          09-02-2025, 03:31 AM
        • Loading...
        • No more items.
        Working...