guys....i know that rubycon MBZ series its the low ESR model....but if it possible i use the ZL series ?? becuz i cannot get the low esr at malaysia its very hard to find ,now i just found the Sanyo brand only ....its to expensive lol @_@
-
-
Re: capacitor series
Rubycon ZL series should be OK. I have seen them used in some PSUs before.Don't find love, let love find you. That's why its called falling in love, because you don't force yourself to fall, you just fall. - Anonymous -
Re: capacitor series
for psu you don't need the lowest of the low ESR caps.
Panasonic FC would be a reasonably good choice too from what I understand
...or whatever the equiv is the Asia region
Have a look through this post of Yanz's hard work to get some other options
https://www.badcaps.net/forum/showth...t=panasonic+fj
HTH
Cheers
You step into the Road, and if you don't keep your feet, there is no knowing where you may be swept off to." Bilbo Baggins ...Comment
-
Re: capacitor series
hmm... what about on motherboard ?? can the Panasonic FC series or Rubycon ZL series can be used ??Comment
-
Re: capacitor series
While MBZ would be the better choice for some applications, FC and ZL would both be good series to use on motherboards.Comment
-
Re: capacitor series
It all depends on the design of VRM. If there is plenty space for several caps, you simply don`t need anything beyond FC or ZL.
If it is a Value board, designed with a two phase VRM and may be 4x 3300uF KZG, i think Panasonic FC or ZL are not suitable due to to high ESR.Comment
Comment