I am interested in some sort of solder sucker that is basically a vacuum ie; i turn it on and it will suck the liquified solder
The solder suckers that are sold for a few bucks are not the type i am looking for. When i remove a BGA chip i clean the solder balls with a Hakko FX which works well, however i am always looking for new ways and new things. I figured a sort of touchless cleaning would work much better.
After the BGA is removed i would use a air wand to keep the site hot while moving the vacuum over the pads sucking the solder. That is the idea i want to accomplish.
I would appreciate any suggestions in creating such a device or modifying some other devices for this
The solder suckers that are sold for a few bucks are not the type i am looking for. When i remove a BGA chip i clean the solder balls with a Hakko FX which works well, however i am always looking for new ways and new things. I figured a sort of touchless cleaning would work much better.
After the BGA is removed i would use a air wand to keep the site hot while moving the vacuum over the pads sucking the solder. That is the idea i want to accomplish.
I would appreciate any suggestions in creating such a device or modifying some other devices for this
Comment