Variable Power Supply from ATX
Collapse
X
-
-
Re: Variable Power Supply from ATX
Thank you,
PeterComment
-
Re: Variable Power Supply from ATX
it was a good link find by noppa might try to build on of these myself now.Comment
-
Re: Variable Power Supply from ATX
I use the ATX based supply I made all the time. I just make sure I am with it when it is on and I only use it in short bursts. I wish I knew more about capacitors and power supplies when I made it. It may need to be recapped just due to their age, I did not realize this when I made it.
I can still add the +3.3V and -5V to it if I wanted to do so, but with my regulator there is no reason for it. I picked that supply because I thought it was quality and it was old enough to not have a P4 power connector plus the lay out gave me working room. It is actually out of a PIII based Cisco PIX firewall. One of the things I found difficult in this project was just finding a supply that gave me room to work. I rejected a lot of them for that reason alone.
The idea of having a built in voltage regulator and display is a nice touch. There are many ideas out there or you can come up with you own to fit your needs.
@ Peter9DO Have you built you one yet or are you still looking at it?
These are the links for instructions I followed, I am not saying they are good instructions:
http://www.wikihow.com/Convert-a-Com...b-Power-Supply
http://www.wikihow.com/Add-Variable-...h-Power-SupplyComment
-
Re: Variable Power Supply from ATX
I built mine, but after seeing this one with the a actual control to it along with a voltmeter on it, I think I will be repurpousing mine to do that. I like that idea and it will go nice with my actual power supply I have (of course I would like to put a couple of my own touches on it, not saying their is anything wrong with this setup, because I think it's GREAT!).
Do you still have yours still together and did you put it on a perf board or did you just leave it on the breadboard?Comment
-
Re: Variable Power Supply from ATX
I actually etched the board for my voltage regulator. I made it so that it plugs into my breadboard. I input voltage on one set of rails and it outputs regulated voltage to all the breadboard power distribution rails for use in projects. To set the voltage I just drop my DMM leads into banana jack cups on my breadboard that are connected to the regulated voltage rails then adjust the variable resistor to give the desired voltage. If I want to use -12V, I use 1A fuse in my regulator because that is what the power supply is rated for on that output.
The site I used was the only one I saw like it prior to building mine so I had no idea how many different ways this can be done. For now mine does all I need it to so I am going to leave it alone until I a have a need for something different. All I needed out of mine was to power my breadboard projects so I could quit wasting money and effort fighting with batteries.
For projects I transfer to PCB I just power them with battery boxes or put on-board voltage regulators with power jacks that use common DC wall socket transformers.Comment
-
Re: Variable Power Supply from ATX
Okay, now I see what you're talking about. I thought everything you had layed out on the breadboard in the picture is what you were using but, now I see that board you have attached on there. Looks good, and if it does everything you need it to, why replace it! I'll have to take some pictures of mine and post it when I have a chance. Maybe, I'll just take pictures of it once I overhaul it, seeing it really is nothing spectacular now. It looks like any other ATX power supply.Comment
Related Topics
Collapse
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?by Tynan DillI was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming...7 Photos -
by sam_sam_samI have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump
One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy... -
by sam_sam_samI have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails
I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time... -
by JimBanvilleThe sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
Opened it up and discovered the power supply is making a faint clicking or ticking sound.
I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...-
Channel: Troubleshooting Audio Equipment
-
-
by sam_sam_samI found this switching power supply when looking for some switching power supply
https://www.ebay.com/itm/31523786004...zQGdd1u34%3D%7... - Loading...
- No more items.
Comment