Identifying capacitors

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK
    #1

    Identifying capacitors

    None of these caps are bulging - just curious if anyone knows about them.

    (#1) Capacitor with an "S" on it. No other identifying marks, apart from capacitance and voltage. I think it's Samxon, but there's space to put SAMXON there so why didn't they? The green color is consistent with some Samxon capacitors.

    (#2) Another "S" capacitor but it doesn't seem like a Samxon because it has a non-Samxon vent...

    (#3) Another capacitor is by Daewoo. I thought they made cars...! Maybe they make industrial equipment too.

    (#4) This one LOOKS like a Chemicon. It has the shield. But the shield has a small dot in the centre, which I have not seen before. Also, the series is "SMS", and I can't find any results for that particular series. The closest is "SM".

    From an LCD TV: LG LE-15A15 (15" monitor / TV.)

    Other capacitors in this monitor: Samwha, Samyoung and G-Luxon (plus probably a few more - not checked everywhere yet.)
    Attached Files
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.
    Tags: None
    • lti
      Badcaps Legend
      • May 2011
      • 2555
      • United States
      #2
      Re: Identifying capacitors

      I have an old modem with one of those "S" caps on it. There is a picture of this cap on the same modem here. I posted a picture of the other side of that cap. I was wondering who made it as well.
      Attached Files

        Comment

        Previous template Next

        Related Topics

        Collapse
        • varkatope
          Need help identifying capacitors on an MSI MS6163 ver 1. motherboard
          by varkatope
          Hey there, retro fans.

          I have an MS6163 version 1 board I'm trying to repair which was obviously used as a donor because it's missing a few parts, mostly capacitors. There are few high quality images online that would allow me to read the capacitor values (bad angle, blurry photos). I thiiiink I've figured out most of the values for the missing ones except for one in particular, number C210, which is in the bottom-left of the attached photo. Could someone with this board be so kind as to take a look at theirs and tell me the capacitance and voltage values of all the highlighted missing...
          MS6163_V1_MissingCaps
          1 Photo
          12-15-2024, 09:48 AM
        • dragon3x
          After updating motherboard capacitors, what to do next (Asrock K7VT2, SOLTEK SL-75FRN2L)
          by dragon3x
          Hi, I have some 32 bits computer motherboards that need repair, as they fail to
          power on.

          Here are some examples :

          (N.B. "capacitors" indicated here are electrolytic capacitors located in the onboard
          switching supply area).
          (N.B. #2 : I could not find a 3300 microF aluminum-polymer with a higher voltage
          than 6.3 V.)

          1 - Motherboard #1 : this is an Asrock K7VT2 (socket A) that still works well. To put it on test
          I replaced capacitors with aluminum-polymer.
          3300 microF/6.3 V. x 4 replaced by 3300 microF/6.3 V. (KYOCERA...
          03-21-2025, 02:46 PM
        • slybunda
          AA and AAA battery charger capacitors?
          by slybunda
          hey all, iv got my favourite battery charger here which iv had for many years probably 15 years now or maybe even more. it still works good but thought id open it up to clean the dust out of it, lots of dust inside but now its clean and noticed 4 capacitors inside it and wondered if i should replace them.
          it has inside:
          2 x 47uf 16v caps 105c branded as Su'scon (lol sounds sus to me)
          2 x 470uf 16v LZ105c branded as G.Luxon

          not heard of these brands are they any good?

          iv attached photos of the charger and the board inside for an idea on the type of...
          12-24-2023, 04:41 AM
        • sam_sam_sam
          Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
          by sam_sam_sam
          I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

          This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

          After all of...
          07-13-2024, 08:14 PM
        • Cama
          Solar Inverter - SMH-II - 2 missing capacitors
          by Cama
          Hello,
          I need help to find the value of 2 missing capacitors ( C102 and C117) on my Easun SMH-II mainboard (solar hybrid inverter). I circled it in red on the close-up picture. The 2 old capacitors are completely missing, so I have no reference. Does anyone have this board and can tell me the value or make an educated guess based on the location ?


          My model is : EASUN SMH-II 7 KW
          Mother Board : P/N 18947-002401250250
          Maybe the EASUN SMH-II 4.2 KW have the same capacitors


          Thank you...
          09-12-2025, 02:50 AM
        • Loading...
        • No more items.
        Working...