MOSFET Rds(ON) comparison

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • japlytic
    Badcaps Legend
    • Oct 2005
    • 2086
    • Australia
    #1

    MOSFET Rds(ON) comparison

    If you notice it, many MOSFET datasheets list the ON resistance Rds(ON) when the Gate to Source voltage is 10V.
    I think this is an industry standard.
    Some MOSFET datasheets (such as the CEP603) also list the Rds(ON) for lower and/or higher Gate to Source voltages.
    My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.
    Tags: None
    • Wizard
      Badcaps Legend
      • Mar 2008
      • 2296
      #2
      Re: MOSFET Rds(ON) comparison

      Also there are some that is for logic level MOSFETs that can be driven directly from logic voltage.

      The other issue is capacitance level on the gate. This make need for stronger gate driver to swing fast enough on gate voltages if the capacitance is high enough. Other wise the MOSFET overheats if the swing time is too slow.

      Cheers, Wizard

        Comment

        Previous template Next

        Related Topics

        Collapse
        • tofik
          MOSFET equivalent K8A60DA
          by tofik
          Hello guys,

          I have a shorted MOSFET K8A60DA with the following characteristics:
          Type Designator: TK8A60DA
          Marking Code: K8A60DA
          Type of Transistor: MOSFET
          Type of Control Channel: N -Channel
          Maximum Power Dissipation (Pd): 45 W
          Maximum Drain-Source Voltage |Vds|: 600 V
          Maximum Gate-Source Voltage |Vgs|: 30 V
          Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
          Maximum Drain Current |Id|: 7.5 A
          Maximum Junction Temperature (Tj): 150 °C
          Total Gate Charge (Qg): 20 nC
          Rise Time (tr): 25 nS
          Drain-Source          ...
          07-19-2023, 05:18 AM
        • Jane
          How do you test MOSFET in laptops ?
          by Jane
          I tried to use this method:

          Testing an N-channel MOSFET:

          Step 1: Discharge the Gate (turn off the MOSFET)
          Place the black probe (COM) on the Source (S) and the red probe on the Drain (D). The multimeter should show no continuity (high resistance or "OL" – open line).
          Then, touch the black probe to the Source (S) and the red probe to the Gate (G). This discharges any stored charge in the Gate, turning the MOSFET off.

          Step 2: Charge the Gate (turn on the MOSFET)
          Now, place the red probe on the Gate (G) and the black probe on the          ...
          09-27-2024, 03:31 AM
        • irfan karatela
          MOSFET no voltage at gate Quanta G7HA DAG7HAMB8EO
          by irfan karatela
          I'm working on a HP Pavilion Laptop Model 15-eh1508sa that is missing 19v. I've looked at the schematics and want to know what conditions the ISL9238C checks before it enables the gate for MOSFETs PQ8200 and PQ8201,

          I havent found any shorts on the board.

          I get 19v at +PRWSRC but around 1.7v at the Drain of PQ8201(+vin)

          On Page 82 of the attachment. Link to schematic - https://www.badcaps.net/forum/troubl...ilion-laptop-p...
          01-20-2025, 07:15 PM
        • MicroSMD Lab
          ASUS ROG Zephyrus GPU Mosfet repeat failure
          by MicroSMD Lab
          The board number is GU502DU. I repaired this a couple weeks ago and it came back with the same issue, same mosfet failed (PQH9201). I'm hoping that the GPU was spared this time.
          I used the same replacement part (purchased from Mouser) and I'm certain the soldering was done properly since it took just as much effort to remove as before. What could cause this same mosfet to fail? I'm thinking if it was unsuitable then the others would fail too. I looked for similar failures on YTube and the mosfet was replaced with AOE6930 in one instance and AOE6932 in the other but it's possible that the...
          01-10-2024, 06:36 AM
        • Scotchmist
          Asus GA502D keeps blowing mosfet
          by Scotchmist
          I have an Asus GA502D, it had a blown mosfet which I replaced and the laptop booted into windows, a few mins later it shut off, the same mosfet was blown. I thought maybe just a bad mosfet but same thing happened again, a few mins in windows and shuts off.

          I have removed the mosfet and can run the laptop no problem

          The MOSFET is FDPC5018SG

          Can anyone point me in the direction of what could be the cause of this, could it be the controller rt3663bc?

          Thanks
          08-24-2024, 02:23 PM
        • Loading...
        • No more items.
        Working...