Driver brushless motor

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ut-norm
    Senior Member
    • Nov 2019
    • 67
    • italia
    #1

    Driver brushless motor

    Hi everyone, I have a brushless motor, of which I am attaching a photo mounted on a DEWALT battery saw that has a faulty controller driver but with the windings ok. I would like to feed it with another controller driver (after having obviously removed the broken one mounted on the base of the motor ) but I don't have clear ideas about it. I've seen many controllers on Aliexpress but I don't know which one to get. It should have a locking system like the original one in case of engine jam.
    Can you help me?
    Hello everybody.
    Attached Files
    Tags: None
    • petehall347
      Badcaps Legend
      • Jan 2015
      • 4426
      • United Kingdom
      #2
      Re: Driver brushless motor

      figure out what sort of feedback it uses and go from there .

        Comment

        Previous template Next

        Related Topics

        Collapse
        • osrex
          LED DRIVER KEEPS DYING
          by osrex
          Hello, this is my first post and im just a beginner, so be easy on me guy. thanks



          i have a LED chandeilier that switches colors from white to cool white to warm when toggling the switch, it has 24 LED arms, each arm is 30 CM length.



          i have no datasheet at all for the LED lights, all i have is its length.



          long story short, testing the chandelier on the ground, and it works fine for 1 - 2 - 6 hours, no problem.



          as soon as i fix the chandelier to the ceiling and bury the driver inside the hub,...
          05-05-2025, 03:36 PM
        • delir66
          How to fine control a brushless dc motor
          by delir66
          Hi, I'm building a pottery wheel for my wife.

          Since it needs to reverse direction and have a nice control over rpm, I decided to pick a diy electric scooter motor.

          It operates at 48v and comes with a controller.

          It has three wires for speed control
          -5v
          -gnd
          -signal.

          The problem is that if I use a 100k pot, motor starts spinning when 1.4v and will get to max revolutions at 3.4v. With this 2v range, the potentiometer is not really ideal, as it will change suddenly rpm with the slighlest touch.
          I need something...
          12-07-2022, 11:00 AM
        • sbt123
          charnwood w821 mini wood lathe motor problem
          by sbt123
          hi there,im having a look at repairing a wood lathe for my dad,(charnwood w821)the problem is when turning up the variable speed control,the motor starts to stop and start by itself,if i continue to turn up the speed it will trip the mcb in the consumer unit,there is also a slight smell of burning from the speed controll box.,Another strange symptom is the lathe can be unplugged from the mains after switching it off and the motor will spin a couple of times by itself,so far ive put a new speed controll potentiometer on and new motor brushes,ive also tested the motor windings and everything looks...
          10-27-2024, 03:43 AM
        • howardc64
          Vizio E55-F1 dark backlight zones. LED failure or Dimming Zone Driver?
          by howardc64
          Problem

          Fixing a dimming zone TV with LEDs not lighting up. Dimming zone circuit introduces added variable to diagnose LED and/or Dimming Zone Driver board? Some 1/2 rows of LEDs appears to be out in active dimming zone off AND some brightness flickering with active dimming zone high while playing changing video



          Model & Board Pics



          Conflicting Spec

          Vizio indicate this TV has 10 dimming zones. However, LED strips and Zoned light driver connector suggest 12

          https://www.shopjimmy.com/vizio-gj-2k1...
          10-10-2024, 01:16 PM
        • charif
          Audio Driver for Thomson P14C4BK128
          by charif
          Need Audio Driver for Thomson P14C4BK128 (Windows 10/11)

          Hi everyone,

          I'm looking for help finding the correct audio driver for my Thomson P14C4BK128 laptop.
          The sound is not working properly, and I believe the audio driver is missing or not installed correctly.

          Here are the details:
          • Model: Thomson P14C4BK128
          • Operating System: Windows 10 64-bit

          If anyone has a working link to the driver or knows where I can download it, I'd really appreciate it.

          Thanks in advance for your help!
          04-30-2025, 05:41 PM
        • Loading...
        • No more items.
        Working...