UTİ 260B Thermal Imager

[ay_bulut]

I need UNI-T 260b firmware

[ay_bulut]

Re: UNI-T 260B Thermal Imager

it stays like this

[sam_sam_sam]

Re: UTİ 260B Thermal Imager

uni-t 260b firmware download <—(Google this )

https://www.uni-trend.com/html/produ...s/UTi260B.html

This is in the manual for this device

Is there a reset button on this device

“ To restore factory settings:
1) Press the up/down button to select the Factory Reset option in the System Settings
submenu.
2) Press the SET button to enter.
3) Press the up/down button to select Yes.
4) Press the SET button to confirm.
5) Press the back button to exit.
Note: During the factory reset process, please do not force other operation to avoid program errors.”

[ay_bulut]

Re: UTİ 260B Thermal Imager

no reset button.

[ay_bulut]

Re: UTİ 260B Thermal Imager

I tried it because the menus are not visible

[sam_sam_sam]

Re: UTİ 260B Thermal Imager

I tried it because the menus are not visible

Do the buttons do anything at all

The software is some type zip file type that is unknown I can not unzip it

[ay_bulut]

Re: UTİ 260B Thermal Imager

Do the buttons do anything at all

The software is some type zip file type that is unknown I can not unzip it

link below has video

https://youtube.com/shorts/mCEEwUoOahk

[stj]

Re: UTİ 260B Thermal Imager

Do the buttons do anything at all

The software is some type zip file type that is unknown I can not unzip it

post the file

[sam_sam_sam]

Re: UTİ 260B Thermal Imager

post the file

The file is on there website link

https://www.uni-trend.com/html/produ...s/UTi260B.html

[sam_sam_sam]

Re: UTİ 260B Thermal Imager

link below has video

https://youtube.com/shorts/mCEEwUoOahk

How much of a charge does this unit have it could be that if it below a certain point it might not let finish booting but this is just a guess

But I have seen some devices do this where either it will not boot at all or it will only partially boot

Or there is something wrong with firmware installation or setup

If you can not figure out what going on then if this device is new get with the seller and find what can be done to resolve this issue

[stj]

Re: UTİ 260B Thermal Imager

it's a RAR file, not a zip file.

install this for archive opening:
https://peazip.github.io/

no need for any stupid shit like patches or serials - it's open-source.

[vitaliik]

Re: UTİ 260B Thermal Imager

Hey Buddy! Did you found a Solution for your Problem? I have the same Problem. My UTI260b can't finish booting. With 100% he stops and that*s all. With completely low Battery i can start him somehow but not always. I have really no Idea what i can do and serching for new Firmware wasn*t succesfull. Thanks for Answer.

[Алекс]

Re: UTİ 260B Thermal Imager

Hey Buddy! Did you found a Solution for your Problem? I have the same Problem. My UTI260b can't finish booting. With 100% he stops and that*s all. With completely low Battery i can start him somehow but not always. I have really no Idea what i can do and serching for new Firmware wasn*t succesfull. Thanks for Answer.

Also such a problem. Did you manage to solve it?

[ay_bulut]

Re: UTİ 260B Thermal Imager

Hey Buddy! Did you found a Solution for your Problem? I have the same Problem. My UTI260b can't finish booting. With 100% he stops and that*s all. With completely low Battery i can start him somehow but not always. I have really no Idea what i can do and serching for new Firmware wasn*t succesfull. Thanks for Answer.

Also such a problem. Did you manage to solve it?

I talked to the authorized dealer and they exchanged it for a new one.

[sam_sam_sam]

Re: UTİ 260B Thermal Imager

I talked to the authorized dealer and they exchanged it for a new one.

That what I figured that you would have to have it replaced