Bakon 950D

[stj]

Re: Bakon 950D

i think the most usefull tip is ILS

[vinceroger69]

Re: Bakon 950D

here is a table of tips.
http://www.hakko.com/english/tip_sel...eries_t12.html

Thanks stj for the hako list and i have just emailed the ali express seller to check its a 240v unit

[vinceroger69]

Re: Bakon 950D

Thanks i may just get the two tips you have listed as would save me some money too

[stj]

Re: Bakon 950D

here is a table of tips.
http://www.hakko.com/english/tip_sel...eries_t12.html

[stj]

Re: Bakon 950D

i'm not sure it's 100-230v - check the 110v bit with the seller.
http://www.bakon.cn/product_detail-567.html

[diif]

Re: Bakon 950D

nasty.
where did you buy the crap one?

btw, found a stand yet??

i'm thinking it needs to be handled in a different way from the traditional stand.
with the tip facing upwards.
i was thinking of maybe a heavy base like a microphone-stand with a U shaped clip on it to put the handle down onto.

Aliexpress. Was about £15 not the usual £22+. I spent £7 on replacing the crap handle so about the same.

Nope, no stand yet, i leave it laying on my desk for added excitement/danger.

They look ok Vince. I mainly use a T12-JS02 and T12-K tip and wouldn't use half of that tip set, but it's personal choice and soldering style I guess.

[vinceroger69]

Re: Bakon 950D

Thanks i will have a look on ali express and hopefully i can order the correct unit then.

so just saw these whats your thoughts
https://www.aliexpress.com/item/EU-p...999.287.YpHSTi
https://www.aliexpress.com/item/10PC...999.302.YpHSTi

[stj]

Re: Bakon 950D

nasty.
where did you buy the crap one?

btw, found a stand yet??

i'm thinking it needs to be handled in a different way from the traditional stand.
with the tip facing upwards.
i was thinking of maybe a heavy base like a microphone-stand with a U shaped clip on it to put the handle down onto.

[diif]

Re: Bakon 950D

Yes, identical. Same moulding and stickers.

[stj]

Re: Bakon 950D

hmmm.
do the controllers look identical??
i suspect one is a clone.

[diif]

Just a quick one for Vince and any others thinking of buying a Bakon 950D soldering iron.
There are two types of handle. The one on the right in the photo has a rubber grip, finger guard and a nice short piece of tip protruding.
The handle on the left is a cheaper all plastic handle with no finder guard and a much longer piece of the same T12 style tip protruding.