I want to start doing more SMD projects and would like to buy a rework station that is $200 or under. If you could, please let me know what you like and dislike about your suggestion (if you own one). Thanks a bunch,
Z
Z
-
-
Re: Can anyone suggest a rework station <= $200
Here's mine. A very useful tool, I use it as much for smd work as i do removing phone and tablet screens. It's a copy of an Ayoue i believe. I am happy with it.
In hindsight i'd have saved some money and just bought a similar machine but without the soldering iron and thus saved some money.Attached Files -
-
Re: Can anyone suggest a rework station <= $200
Ah Thanks Diif, I am thinking of going Aoyue. Just want something that is going to actually work for a while.Comment
-
Re: Can anyone suggest a rework station <= $200
http://www.dx.com/p/gongjue-8018lcd-...rk-blue-277080Comment
-
Re: Can anyone suggest a rework station <= $200
this works really good Steinel HG2310LCD
I think this is the link for your country
http://www.steinel.net/Professional-Heat-Guns/HG2310LCDrunning, biking, oscilloscoping
Comment
-
Good day.
i received used bga rework station wds-580 which was not going above 300c despite the parameter was set to 350c, Everytime beeps at 300c so i did a factory reset and by mistake washed data and log etc. now the station boots to a white screen.
Does anyone has a firmware for this station and want to share with me. i will really appreciate any help possible..
kind regards...03-28-2024, 01:14 PM -
hi all im looking for a Schematic for jbc am6800 rework station
mine has stopped working fully
it started with turning off when switched on then after a few off and ons it worked sort of for awhile
now it wont turn on at all...01-28-2025, 03:44 PM -
Good day Experts.
I have recently aquired a rework station SEAMARK ZM-R6800,. Is there anyone using this or some other similar station and give me some info about profile temp curve etc for removing leadfree soldered gpu chip..? just 1 profile will be enough to get started.
Kind regards -
Hi,
I been playing with a recently acquired IR6500 rework station and watching lots of YouTube tutorials to see how to use it with not much success. I’ve only recently joined badcaps but going through the forums there is a lot of knowledge here, so though it best is if I ask my question here.
1. Firstly is the IR6500 any good for BGA rework or should I be spending my money on a better one.
2. The instruction manual is pretty useless on explaining how to set the PID loops (no information at all!!) both top and bottom heater for th Kp, Ki and Kd...10-14-2022, 12:31 AM -
This specification for the HP Station de travail Z2 format tour G4 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Station de travail Z2 format tour G4 boardview and Station de travail Z2 format tour G4 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no...09-12-2024, 02:20 PM
Comment