ADVICE FOR BUYING A DIGITAL MICROSCOPE

[bohaboha]

Hi I'm thinking of buying this :1080P 4K HD Industrial Microscope 150X C-Mount Lens 48MP/13MP Digital Camera HDMI USB-C VGA Measurement For PCB Soldering DIY it's on ALiExpress : https://www.aliexpress.com/item/1005...av-description
the one i choose is the D full Set
maybe you can advise me or maybe someone who has similar who can give feedback on it very grateful for any ideas thanks

[bohaboha]

No one who can contribute anything?

[harp]

Here... some information... https://engraverscafe.com/threads/st...to-avoid.3451/

[bohaboha]

[QUOTE=harp;n3582096]Here... some information... [url]https://engraverscafe.com/threads/stereo-microscopes-to-buy-and-to-avoid.3451/[/u

thank you i have already read your link in another thread it is for those who are in the know what i want is to hopefully get info from someone who has similar or equivalent who has practiced with them but thanks anyway harp will read again maybe i have missed the most important thing

[mon2]

Are you still shopping around? Can share the details of the one we purchased from Aliexpress and is an excellent product. Once in a while the HDMI screen freezes into a 50/50 view for some reason but a simple reboot fixes this small quirk. The quality of the view is just amazing. This is the Aliexpress store that shows off the internal gears of a working watch and keeps zooming in.

Ours is on a fixed stand and an adjustable mount is recommended. Primarily we use for inspection but we have the lenses (not yet mounted) to allow for soldering under the microscope. Much like the setup used by Alex on YT for his repairs.

[bohaboha]

Are you still shopping around? Can share the details of the one we purchased from Aliexpress and is an excellent product. Once in a while the HDMI screen freezes into a 50/50 view for some reason but a simple reboot fixes this small quirk. The quality of the view is just amazing. This is the Aliexpress store that shows off the internal gears of a working watch and keeps zooming in.

Ours is on a fixed stand and an adjustable mount is recommended. Primarily we use for inspection but we have the lenses (not yet mounted) to allow for soldering under the microscope. Much like the setup used by Alex on YT for his repairs.

thank you i already got it and it is very good so long

[stj]

150x sounds huge for pcb inspection!

[bohaboha]

yes it is i have it on 46 hd tv just wonderful but i have to learn to look at the screen not to look down to pcb all the time not that easy