-
How to program IT8585E on RT809F (H) programmer?
It wont work on ITE_ADAPTER_V1.5 board (IT8580, IT8586, IT8587 work when soldered on board)
Please help.
I tried with cable for keyboard it does not work either (Laptop is G750JZ)
005: The currently selected:IT8585_ISP @PEB-1, capacity: 1Mbits, 128Kbytes.
006: http://www.ifix.net.cn/thread-47221-1-1.html
007: >------------------------------------OK---------------------------------------<
008: Wait for the chips enter into the ISP status, please wait...
009: Wait...10-28-2021, 01:35 PM -
The freebie laptop started to give error "BIOS wait EC input buffer empty fail (timeout). What does it mean, empty CMOS battery?
It boots if I press F1, the Bios also works, but it hangs for 1 second about 10 times a minute. So does the touchpad in Windows, USB-mouse works normally. -
Dear Forum members
I searched for a forum on this model TV and could not find so thought I would start a thread on this model and make
I will upload some photos and share my trouble shooting steps so far -
Another dump find, so someone must have given up on it already.
The list price was $700, so I figure it's worth giving it a try.
When I plug it in, the display briefly says Hello, then the volume level, the scrolls Please Wait. There are 4 LEDs under the display words that go in a three second loop of 2 inner on, all 4 on, all 4 off.
From the remote, the volume level changes on the display, but that seems to be the only activity.
The owners manual says to hold the microphone mute button for 5 seconds to reset, but nothing there.
...06-12-2023, 10:17 AM -
Hello have this hotair and soldering iron station that is not work.
have anybody schematic for it?
Working...
😀
😂
🥰
😘
🤢
😎
😞
😡
👍
👎
☕
Comment