Re: talk to me about BGA rework inspection stations

[tjg79]

http://www.solder.net/

Check out the link above. I've dealt with this company about having a motherboard cpu socket replaced. Ultimately, the economics dictated that it was better to replace than repair.

They sell equipment and offer training in addition to doing electronics repair work. Ask what equipment they offer for your application and then check with all their competitors to get a feel for what's available. Then you might be able to pick up the equipment used at substantial savings.

Good luck.

[c_hegge]

Re: talk to me about BGA rework inspection stations

Spam, I believe

[Topcat]

Re: talk to me about BGA rework inspection stations

looks to be clever spam...

[Topcat]

Re: talk to me about BGA rework inspection stations

Apparently not spam. The OP emailed me and cleared it up. Legit thread.

[Kiriakos GR]

Re: talk to me about BGA rework inspection stations

Legit or not, the title is 100% misleading.

It should be : I am suggesting you buying soldering goods from the shop of my uncle.

[c_hegge]

Re: talk to me about BGA rework inspection stations

Interesting. I guess what got me is that it was his first post (and the other two users in the original thread). Sorry about that.

[rudeguy]

Re: talk to me about BGA rework inspection stations

why not post in my thread instead of making a new one?

As I stated in my thread, my company went with SMT Tools BGA300 scope and I will be using my existing IR/Hot Air station.

A PM would have sufficed.

[c_hegge]

Re: talk to me about BGA rework inspection stations

It was originally in your thread, but when we moved the post back, it was put into a new thread. We can merge it back if you like.

[rudeguy]

Re: talk to me about BGA rework inspection stations

It was originally in your thread, but when we moved the post back, it was put into a new thread. We can merge it back if you like.

gotcha

Not a big deal. Just wish I got some actual help instead of......this