Elenco s-1360

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sceva
    Senior Member
    • Feb 2010
    • 196
    #1

    Elenco s-1360

    I have been repairing lcd monitors for about a year, and currently my tools are 60w soldering station, DMM, ring tester and cap tester. I have been considering purchasing an oscilloscope and just saw one locally for $75. It is a Elenco S-1360 used scope. I like the price, and that I can try it before purchasing, but I know almost nothing about scopes and don't know if this is a good brand/model for monitor repair. If anyone has any suggestions please let me know. Here is a link to the specs on this model: http://www.tequipment.net/ElencoS-1360.html

    Thanks.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • tony359
      Ring tester
      by tony359
      Hi all,

      I'd like to add a ring tester to my toolbox to test flybacks but also low frequency transformers if possible.

      I found a few products online, some based on the "diodegonewild" design, others are different designs. Some are available to build DIY, others are not.

      Any suggestions on a DIY one I could put together? Ideally something which would also be able to test low frequency transformers, that might be handy.

      So far I found these two:

      http://bobparker.net.au/Basic%20Digital%20Ringer/ (the posher version...
      09-13-2023, 07:34 AM
    • sam_sam_sam
      Used a Ring tester to troubleshoot a switching power supply that has a blowed fuse
      by sam_sam_sam
      I found this switching power which has a blowed fuse checked diodes which were still good out of circuit checked main filtering capacitor with an ESR meter 220uf@450 volts 0.15 value which to me seem bad but maybe not but without these items not in the circuit because I have about 8 ohm on the output of the capacitors so I removed the switching power supply transformer and checked it with a ring tester and all but one winding showed good all others either showed two red lights or no lights on and one winding had all lights on which was the only one that was good

      One other check that...
      08-03-2021, 06:41 PM
    • CapLeaker
      VOIP, ATA REN and old analog phones ring voltage booster
      by CapLeaker
      I am working on a backup phone to VHF paging solution. Basically I am dealing with the old Zetron pagers. Here is how it works: One calls a number, the Zetron picks up, operator punches in the DTMF access code, the Zetron keys the transmitter and you can talk. press # the Zetron unkeys the transmitter and hangs up / times out.
      Now this setup works good on the old land lines, but not at all using a VOIP ATA. You can call all you want and swear like a bastard at the Zetron, but it will not (even if I threaten it's life) pick up.
      Yep, I know about the high ring voltage...
      12-10-2022, 09:27 PM
    • Lifeisfun
      Trying to troubleshoot DDR4 SODIMM slot with slot tester
      by Lifeisfun
      Hi folks!
      I have some kind of memory problem on Lenovo laptop. I was initially able to install windows after several tries since the laptop did freeze in middle of those attempts.
      Eventually I discovered that it was related to moving the laptop.
      Later on it even stopped booting unless I pressed around the memory slot. (no keyboard LEDs only power button responds)
      If I remove the RAM I get the beeps that RAM is missing. Inserting the RAM there is silence and it will not boot most of the time. No picture.

      I removed the board got one of those memory slot testers...
      06-04-2025, 02:26 PM
    • spleenharvester
      Reverse engineering of 18650 4-channel tester
      by spleenharvester
      Hi friends

      I have reverse engineered this tester, schematic is attached and is complete except for capacitor values. These testers annoyingly have no model number but they are the ones you find on the first page of just about any website if you type in "18650 4-channel tester". There is also a 2-channel variant and a newer 8-channel variant. They are very cheap (about £15) and can measure voltage, current, internal resistance and capacity. They have a multicolour display for all these statistics. They also have terminal blocks so that if you want to use a breakout board...
      05-04-2025, 02:43 AM
    • Loading...
    • No more items.
    Working...