Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Equipment Usage, Soldering, Techniques, and Reviews
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 01-16-2019, 01:12 PM   #1
diamon
New Member
 
Join Date: Feb 2010
Posts: 7
Default Which Eprom programmer to buy

I have done a lot of searching on the web and this forum, but did not find an answer.
I'm looking for a programmer that can flash the W25Q64FW / W25Q32FW (1.8Volt), and perhaps later on different ones.
I have found the EZP2010, EZP2013, EZP2019, CH341A but I have no idea which is better and more reliable in hardware/ software functions / updates.
These links I have found:

EZP2019
EZP2013
CH341A
EZP2010

Any one with experience with these model numbers ?

Last edited by diamon; 01-16-2019 at 01:32 PM..
diamon is offline   Reply With Quote
Old 01-16-2019, 01:33 PM   #2
stj
Great Sage 齊天大聖
 
stj's Avatar
 
Join Date: Dec 2009
City & State: Europe
My Country: some shithole run by Israeli agents
I'm a: Professional Tech
Posts: 20,082
Default Re: Which Eprom programmer to buy

ch341a can not run at 1.8v
i dont know about the others.
stj is offline   Reply With Quote
Old 01-16-2019, 02:38 PM   #3
vinceroger69
Badcaps Veteran
 
Join Date: Mar 2012
City & State: Nuneaton Warwickshire
My Country: uk
I'm a: Hobbyist Tech
Posts: 5,770
Default Re: Which Eprom programmer to buy

tl866 with the 1.8v adapter
https://www.ebay.co.uk/itm/1-8v-ADAP...-/121999972799
vinceroger69 is offline   Reply With Quote
Old 01-16-2019, 04:04 PM   #4
diamon
New Member
 
Join Date: Feb 2010
Posts: 7
Default Re: Which Eprom programmer to buy

I cannot edit the original posting anymore, but it's not the W25Q64FW / W25Q32FW.
The correct chips are W25Q32FVSSIQ and W25Q64FVSSIQ, these are 3V chips and not 1.8V
diamon is offline   Reply With Quote
Old 01-16-2019, 04:09 PM   #5
CapLeaker
Leaking Member
 
CapLeaker's Avatar
 
Join Date: Dec 2014
City & State: Atlantic Canada
My Country: Canada
Line Voltage: Ground, 0Hz
I'm a: Hobbyist Tech
Posts: 3,823
Default Re: Which Eprom programmer to buy

So does the RT809h with the adapter. As for cheap, go with the ch341a.
CapLeaker is offline   Reply With Quote
Old 01-22-2019, 02:58 PM   #6
diamon
New Member
 
Join Date: Feb 2010
Posts: 7
Default Re: Which Eprom programmer to buy

Thanks for the information.
No one has experience with the EZP201X programmers?.

The EZP2019 is also cheap (under the $14 dollar), and it has a couple of adapters.

Is XGecu (www.xgecu.com) the original fabricator of the TL866II Plus, and is this a better to buy ?

Last edited by diamon; 01-22-2019 at 03:54 PM..
diamon is offline   Reply With Quote
Old 01-22-2019, 08:44 PM   #7
CapLeaker
Leaking Member
 
CapLeaker's Avatar
 
Join Date: Dec 2014
City & State: Atlantic Canada
My Country: Canada
Line Voltage: Ground, 0Hz
I'm a: Hobbyist Tech
Posts: 3,823
Default Re: Which Eprom programmer to buy

I have a TL866 plus and the RT809h. The TL866 has a nice and easy software. It's not a mix between English and Chinese like on the RT809h. It all depends on the end what you want / need to program and what you can afford on the end of the day. In my case I have both, because one is not programming something the other one does and vise versa.
CapLeaker is offline   Reply With Quote
Old 01-31-2019, 08:51 AM   #8
dj_ricoh
Badcaps Veteran
 
dj_ricoh's Avatar
 
Join Date: Jan 2013
City & State: London
My Country: uk
I'm a: Knowledge Seeker
Posts: 1,979
Default Re: Which Eprom programmer to buy

I have ezp 2010 and I've read and write gpu ,laptop, and one dslr bios.
I have no problems with aside drivers but it turned out to be ok in win10.

Successful manually flashed gpus bios and I can't complain.
Laptop bios was the original but those one where easy.
__________________
Just cook it! It's already broken.
dj_ricoh is offline   Reply With Quote
Old 02-06-2019, 03:43 AM   #9
Duranitron
Member
 
Join Date: Jul 2014
City & State: Caloocan, Manila
My Country: Philippines
Line Voltage: 220VAC 60hz
I'm a: Professional Tech
Posts: 36
Default Re: Which Eprom programmer to buy

i have an ezp2010 its fast and reliable. it can do most of the job with lightning speed..
Duranitron is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 10:17 PM.
Did you find this forum helpful?